What are the new opportunities for new energy lightweighting for modified plastics?
What are the new opportunities for new energy lightweighting for modified plastics? Automotive lightweighting is an important direction for the future development of the automotive industry, both for traditional fuel cars and new energy vehicles, lightweighting is an effective means to effectively reduce energy consumption and improve energy efficiency.
What are the properties of PA46's Stanyl:
What are the properties of PA46's Stanyl: Stanyl's excellent properties give it major advantages in terms of cost reduction, extended service life and reliability. In terms of ease of processing, Stanyl has properties that are not unlike those of high temperature resins such as LCP, PPS and PEEK. Advantages for molders and end users include: high temperature resistance for long-term use und
Can PEI material be used for lamps and lanterns?
Can PEI material be used for lamps and lanterns? PEI (Polyethylene terephthalate) is a high-performance engineering plastic with intentional mechanical properties, heat resistance, chemical stability and electrical properties. Because of these properties, PEI has a wide range of applications in many fields, including the manufacture of lamps and lanterns.
PEEK material is a high-performance thermoplastic material with excellent high-temperature resistance, chemical stability and mechanical properties, and the temperature has a great impact on the preparation of PEEK materials. First, temperature has a significant impact on the melting and solidification process of PEEK materials. In general, the melting temperature of PE
The difference between carbon fiber PEEK and unfilled PEEK
PEEK CF30 is a carbon fiber reinforced - PEEK made from 30% by weight of short cut carbon fibers added to a PEEK matrix. Carbon PEEK is considered one of the strongest of all thermoplastics at room temperature because of its superior properties, which, combined with very good abrasion and wear resistance, make it ideal for replacing metals in more extreme environments. Carbon fiber PEEK is a composite material that is a high-performance polymer. Compared to pure PEEK, carbon fiber provides higher mechanical strength,
What is the difference between PE and PEI materials
What is the difference between PE and PEI materials ? PEI (polyetherimide, Polyetherimide) is an amber transparent solid with inherent flame retardancy and low smoke without adding any additives, with an oxygen index of 47%, a combustion rating of UL94-V-0, and a density of 1.28~1.42g/cm3. PEI has strong high temperature stability, and even if it is non-reinforced PEI,
Difference between PEEK, POM and nylon gears
There are several different options when you are looking for non-metallic gears, such as PEEK, POM and nylon plastics. The main question to ask yourself when deciding which material is right for you is what application you will be using them in. For example, PEEK is much stronger than nylon, but is a bit brittle under load. Often, we use different plastics for different applications, and the most common plastic materials are PEEK, POM, and Nylon.
HONY plastic's PEEK gear hobbing equipment process accuracy and application
PEEK is a special polymer, with high temperature resistance, high strength, corrosion resistance, self-lubricating, wear resistance and other characteristic advantages, the use of machining and injection molding process of PEEK gears with light quality, wear resistance, self-lubricating, low noise, corrosion resistance and other characteristic advantages and is widely used, hony plastic has Y3120CNC2 CNC hobbing machine, the specific processing range is as follows:
The difference between NYLON and Polyimide
Nylon (Nylon), Chinese name polyamide, English name Polyamide (abbreviated as PA), is a general term for thermoplastic resins containing repeating amide groups -NHCO- on the main chain of the molecule. Its name is determined by the specific number of carbon atoms of the synthetic monomer. It was invented by Carothers, a chemist from DuPont and his scientific team.
The nine most common nylon materials in the
The nine most common nylon materials in the "engineering plastics big family - nylon" Nylon was developed by the distinguished American scientist Carothers and a team of researchers under his leadership, and was the first synthetic fiber to appear in the world. Nylon is a plastic
About Ertalyte® PETP and Ertalyte® TX
1. What is Ertalyte® ? Ertalyte® is a family of unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P) products. The specific properties of virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts must endure high loads and wear conditions. It is characterized as having excellent dimensional stability
PEEK gears replace metal in automotive applications
PEEK gears replace metal in automotive applications Plastic gears are gradually replacing traditional metal gears in numerous technical applications because they are lighter and quieter, have good dry running properties, are low friction and low wear, and can be manufactured efficiently. Compared to
Introduction to High performance engineering plastics and application areas
Introduction to High performance engineering plastics and application areas 1.What are High performance engineering plastics ?
Advantages of high performace engineering plastics in the automotive manufacturing industry
Advantages of high performace engineering plastics in the automotive manufacturing industry Plastics according to production scale, product characteristics and application areas can be broadly divided into three categories of general-purpose plastics, engineering plastics and special engineering plastics, where special engineering plastics production scale than the other two production scale is smaller, but because o
What is the best material to use for CMP retaining ring
What is the best material to use for CMP retaining ring ? Silicon wafers are silicon wafers used in the production of silicon semiconductor circuits, and then mechanical polishing process in the production process of silicon wafers and is a very important link, we usually hear a few inc
PEEK's Excellent Properties in Detail
PEEK's Excellent Properties in Detail Polyether Ether Ketone (PEEK resin) is a high-temperature thermoplastic with a high glass transition temperature (143°C) and melting point (334°C), and a load thermal transformation temperature of up to 316°C (30% glass fiber o
About HONY Plastic Fabrication CNC Service
What is CNC Turn / Milling? CNC lathe is one of the more widely used CNC machine tools. It is mainly used for cutting internal and external cylindrical surfaces of shaft parts or disk parts, internal and external conical surfaces of any taper angle, complex rotary internal and external surfaces and cylindrical and conical threads, etc. It can also perform grooving, drilling, reaming, reaming and boring, etc.
Medical grade PC polycarbonate remains the preferred choice for medical applications
Medical grade PC polycarbonate remains the preferred choice for medical applications Polycarbonate (PC) (available from HONY Plastics) is one of the most commonly used and widely tested engineered thermoplastic materials in the medical device industry today. Its inherent strength, excellent optical clarity, high heat distortion temperature and dimensional stability make it an ideal materia
PEEK catheter production in the medical field
PEEK catheter production, applications and development in the medical field PEEK medical catheters are basic medical device products that are widely used in diagnosis, treatment, monitoring, emergency care, drainage, perfusion, gas delivery, blood delivery, and rehabilitation. With the development of modern technology and the increasing average life expectancy of the world's population and
Vespel® components and profiles for harsh industrial operating environments
Vespel® components and profiles for harsh industrial operating environments Extreme temperatures, high friction and heavy loads? Since
TECAMID---Ensinger Extruded Nylon Product Introduction
TECAMID---Ensinger Extruded Nylon Product Introduction PA material, commonly known as nylon, can also be referred to as polyamide. Thanks to its good balance between performance and cost, PA materials are ideal for replacing metals in many industrial applications. Nylon plastic grades are often denoted by numbers that relate to the molecular structure of the nylon plastic, and each structu
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability. TECAMID®
What are polyimide materials and what are their specific application?
What are polyimide materials and what are their specific application? 1, polyimide (Polyimide, sometimes abbreviated as PI), is one of the best overall performance of organic polymer materials. Its high temperature resistance of 400 ° C or more, long-term use temperature range -200 ~ 300 ° C, part of no obvious melting point, high insulation performance, 103 Hz under the dielectric constant 4.0, dielectr
The difference between PET and PI of electric heating film
The difference between PET and PI of electric heating film PET and PI are the two substrates of electric heating film. But what is the difference between the same electric heating film and different substrates? First, let's start by understanding PET and PI: PET is the British abbreviation for polyethylene
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
