The difference between NYLON and Polyimide
Nylon (Nylon), Chinese name polyamide, English name Polyamide (abbreviated as PA), is a general term for thermoplastic resins containing repeating amide groups -NHCO- on the main chain of the molecule. Its name is determined by the specific number of carbon atoms of the synthetic monomer. It was invented by Carothers, a chemist from DuPont and his scientific team.
The nine most common nylon materials in the
The nine most common nylon materials in the "engineering plastics big family - nylon" Nylon was developed by the distinguished American scientist Carothers and a team of researchers under his leadership, and was the first synthetic fiber to appear in the world. Nylon is a plastic
About Ertalyte® PETP and Ertalyte® TX
1. What is Ertalyte® ? Ertalyte® is a family of unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P) products. The specific properties of virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts must endure high loads and wear conditions. It is characterized as having excellent dimensional stability
PEEK gears replace metal in automotive applications
PEEK gears replace metal in automotive applications Plastic gears are gradually replacing traditional metal gears in numerous technical applications because they are lighter and quieter, have good dry running properties, are low friction and low wear, and can be manufactured efficiently. Compared to
Introduction to High performance engineering plastics and application areas
Introduction to High performance engineering plastics and application areas 1.What are High performance engineering plastics ?
Advantages of high performace engineering plastics in the automotive manufacturing industry
Advantages of high performace engineering plastics in the automotive manufacturing industry Plastics according to production scale, product characteristics and application areas can be broadly divided into three categories of general-purpose plastics, engineering plastics and special engineering plastics, where special engineering plastics production scale than the other two production scale is smaller, but because o
What is the best material to use for CMP retaining ring
What is the best material to use for CMP retaining ring ? Silicon wafers are silicon wafers used in the production of silicon semiconductor circuits, and then mechanical polishing process in the production process of silicon wafers and is a very important link, we usually hear a few inc
PEEK's Excellent Properties in Detail
PEEK's Excellent Properties in Detail Polyether Ether Ketone (PEEK resin) is a high-temperature thermoplastic with a high glass transition temperature (143°C) and melting point (334°C), and a load thermal transformation temperature of up to 316°C (30% glass fiber o
About HONY Plastic Fabrication CNC Service
What is CNC Turn / Milling? CNC lathe is one of the more widely used CNC machine tools. It is mainly used for cutting internal and external cylindrical surfaces of shaft parts or disk parts, internal and external conical surfaces of any taper angle, complex rotary internal and external surfaces and cylindrical and conical threads, etc. It can also perform grooving, drilling, reaming, reaming and boring, etc.
Medical grade PC polycarbonate remains the preferred choice for medical applications
Medical grade PC polycarbonate remains the preferred choice for medical applications Polycarbonate (PC) (available from HONY Plastics) is one of the most commonly used and widely tested engineered thermoplastic materials in the medical device industry today. Its inherent strength, excellent optical clarity, high heat distortion temperature and dimensional stability make it an ideal materia
PEEK catheter production in the medical field
PEEK catheter production, applications and development in the medical field PEEK medical catheters are basic medical device products that are widely used in diagnosis, treatment, monitoring, emergency care, drainage, perfusion, gas delivery, blood delivery, and rehabilitation. With the development of modern technology and the increasing average life expectancy of the world's population and
Vespel® components and profiles for harsh industrial operating environments
Vespel® components and profiles for harsh industrial operating environments Extreme temperatures, high friction and heavy loads? Since
TECAMID---Ensinger Extruded Nylon Product Introduction
TECAMID---Ensinger Extruded Nylon Product Introduction PA material, commonly known as nylon, can also be referred to as polyamide. Thanks to its good balance between performance and cost, PA materials are ideal for replacing metals in many industrial applications. Nylon plastic grades are often denoted by numbers that relate to the molecular structure of the nylon plastic, and each structu
Nylon was the first engineering resin. It has been used in applications ranging from electronic, marine, and automotive industries to fibers used to make carpet. Nylon has outstanding wear resistance and low frictional properties. It has very good temperature, chemical, and impact properties. However, nylon's one weakness is a propensity to absorb moisture and thus have poor dimensional stability. TECAMID®
What are polyimide materials and what are their specific application?
What are polyimide materials and what are their specific application? 1, polyimide (Polyimide, sometimes abbreviated as PI), is one of the best overall performance of organic polymer materials. Its high temperature resistance of 400 ° C or more, long-term use temperature range -200 ~ 300 ° C, part of no obvious melting point, high insulation performance, 103 Hz under the dielectric constant 4.0, dielectr
The difference between PET and PI of electric heating film
The difference between PET and PI of electric heating film PET and PI are the two substrates of electric heating film. But what is the difference between the same electric heating film and different substrates? First, let's start by understanding PET and PI: PET is the British abbreviation for polyethylene
Development of PPS sheet and bar
Development of PPS Sheet and Bar PPS (polyphenylene sulfide), also known as polyphenylene sulfide, is a thermoplastic resin with a benzene sulfide group in the main chain of the molecule, is a crystalline (55%-65% crystallinity), highly rigid white powder polymer. HONY Plastic can provide sheets with specifications ranging from 5 to 80 mm × 620 mm × 1000 mm and rods with specifications ra
What are the characteristics of ABS sheet ?
What are the characteristics of ABS sheet ? Food industry parts, architectural models, hand board production, phase electronic industry parts, refrigerator refrigeration industry, electronic and electrical fields, pharmaceutical industry, automotive parts (instrument panels, tool doors, wheel covers, mirror boxes, etc.) Radio shells, telephone handles, high-strength tools (vacuum cleaners,
Back End Test & Related Materials
Back End Test & Related Materials No segment of Semiconductor plastics have been more impacted from miniaturization than Back End Test. Almost all IC devises must be tested for functionality over a wide range of parameters. In performing the test, a jig is required to fix the IC chip properly for testing. That jig is called a Burn In Socket. Small pins called pogo pins are inserted
What are the commonalities and differences between PFA and PTFE?
What are the commonalities and differences between PFA and PTFE? The essential difference between PFA and PTFE tubes is still in the materials they use, to distinguish between these two plastic materials is also very simple, from its appearance, PFA is translucent, PTFE is pure white opaque; and the shape of raw materials, PFA is the material granular, PTFE is powder.
The difference between pure ptfe gasket and common ptfe gasket
The difference between pure ptfe gasket and common ptfe gasket PTFE gaskets: PTFE gaskets, PTFE gaskets, flat gaskets, V-shaped gaskets, piston rings, ball valve gaskets, etc. made of PTFE rods, tubes and plates by mechanical turning or cutting, have good characteristics such as corrosion resistance, aging resistance and non-conductive. PTFE pH 0-14 (except molten alkali metals and fluorine at high temperatu
This article takes you to understand the "originator" of the gasket world: PTFE gasket "fastener gasket" Compared with the name of ptfe gasket, the name that many people are more familiar with is polytetrafluoroethylene gasket, which is a gasket made of polytetrafluoroethylene (PTFE), which is known as the "king of plastics". Field PTFE gaskets are known as the "originator" of the gasket in
What is the difference between PEEK and PPS ?
What is the difference between PEEK and PPS ? PPS (polyphenylene sulfide) is a well-known special engineering plastic with extremely low water absorption, chemical corrosion resistance, good wear resistance, excellent dimensional stability, flame retardancy, good electrical insulation, and high temperature resistance. High humidity can still maintain good electrical properties. Good fluidit
Tel: 86-852-34604012
Whatsapp: 8618680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
