Application of PTFE-coated glass fiber cloth in photovoltaic modules?

Application of PTFE-coated glass fiber cloth in photovoltaic modules?

Weather resistance, anti-aging. Photovoltaic module set in high temperature 100 days strength will be reduced aging, and covered with high temperature cloth photovoltaic module set in high temperature 200 days will not be aging to reduce the strength, so it is weather resistance, anti-aging role. Solar laminator high temperature cloth is known as Polytetrafluoroethylene coated glass fiber cloth, also known as teflon high temperature resistant paint cloth, is a suspended polytetrafluoroethylene emulsion as raw material, impregnated with high-performance glass fiber cloth and become.

Solar PV Module Laminate Fabric High Temperature Laminate Fabric for Solar Laminate Machine
Solar photovoltaic module lamination cloth
The laminate is a special high temperature laminate for solar laminator, using glass fiber as the base material, with suspended PTFE (commonly known as plastic king) emulsion as raw material, impregnated with high performance glass fiber base cloth made.

Principle of laminate application:
When the laminator presses the solar photovoltaic module, the laminated cloth is placed on the top and bottom layers of the photovoltaic module respectively, as the cover cloth and mat cloth. Use the anti-adhesive property of the laminate to prevent eva film and other substances from sticking to the laminator under high temperature.

Main product categories:
1) High temperature cloth for lamination inside the laminator
The order of material when backing plate lamination is Teflon high temperature cloth + glass + eva + cell sheet + eva + backing plate + Teflon cloth, mainly using the anti-adhesive properties of Teflon to prevent eva from sticking to the laminator.
Use specifications: small laminating machine 1.25 meters within the width can be, large laminating machine 1.8, 2.0, 2.2, 2.4 meters width are available, the length varies, generally within 6 meters.
Our products: t:0.25mm, t:0.30mm t:0.35mm
2)High temperature cloth for conveyor belt inside laminator
The battery plate inside the automatic laminator is to be conveyed through a conveyor belt that is resistant to high temperature and anti-adhesive. Since the laminator is vacuumed inside, in order to make the cloth not absorb the plate, the surface of the cloth is required to have a grain, and the tension of the conveyor belt is not too great when it is conveyed.

Use specifications: small laminators 1.25 meters within the width can be, large laminators 1.8, 2.0, 2.2, 2.4 meters width are available, the length varies, generally within 6 meters.
Our products: t:0.25mm, t:0.30mm t:0.35mm