PEEK Application in the aerospace industry The heavy weapon of the country dances together in the dome of the sky, and the world pays attention to the China Airshow! The 15th China International Aviation and Aerospace Expo opened on November 12 in Zhuhai, a number of aerospace field “big country heavy weapon” focused on debut, witnessed the development across the ability. The flight show was unprecedented, the Air Force “August 1st” flight display team shone on the scene, the whole field of attentio
Principle Of Operation Of CNC Lathe
Principle of operation of CNC lathe When using a CNC lathe, the blank material is loaded into a chuck on the lathe spindle. As the spindle rotates, the chuck holds the workpiece in place. When the spindle reaches the desired speed, a stationary cutting tool makes contact with the workpiece to remove the material and achieve the correct geometry. CNC lathes can perform a variety of operations such as drilling, tapping, boring, reaming, facing and taper turning. Different operations require tool changes, which can add cost and setup
What Are The Processing Methods For PPS Sheets?
Polyphenylene sulfide (PPS) exhibits an excellent combination of properties in chemical and high-temperature environments, including abrasion resistance, high load capacity and dimensional stability. In addition, PPS profile denseness, good hardness and excellent resistance to chemical corrosion performance in a variety of industrial equipment in a wide range of applications, such as industrial drying and food processing ovens, chemical equipment, mechanical bearings and electrical insulation systems, etc. PPS profiles can be used for a long time at 220 ℃,
What Is Polyamide PA66 Material ?
Nylon PA66 is a thermoplastic made by polycondensation of adipic acid and adipic diamine. It has high heat resistance, strength, elasticity, abrasion resistance, fatigue resistance and chemical resistance, and is widely used in automotive, electronics, electrical appliances, machinery, chemical industry, aviation and aerospace and other fields. First, the synthesis of nylon PA66 Nylon PA66 is polymerized by adipic acid and adipic diamine. In the polymerization process, adipic acid and adipic diamine added to the reactor, at a certa
Why Is PETG Such A Hot Material?
PETG, as a characteristic plastic material, is receiving more and more attention and application in today's material science field.Overview and Synthesis of PETGPETG is called Polyethylene terephthalate glycol - 1,4 - cyclohexane dimethanol ester (Polyethylene terephthalate glycol - modified). It is chemically modified from polyethylene terephthalate (PET). Specifically, a percentage of cyclohexanediol (CHDM) is used to replace part of the glycol component in the PET synthesis process. This unique synthesis method gives PETG many performance characteristics
Additives Related To Wear Modification Of Plastics
With plastic wear modification related to the 6 categories of more than 20 kinds of additives inventory, with plastic wear resistance big battle Abrasion resistance is a key property for many polymer applications, especially those exposed to mechanical stress and abrasive environments. Polymer additives play an important role in enhancing this property. The following are some of the additives that can enhance the wear resistance of polymers.
Innovative Application Development of Glass Fiberboard in 3C Field
Innovative Application Development of Glass Fiberboard in 3C Field Epoxy Fiberglass Sheet and Semi-Cured Sheet (PP) Introduction Epoxy fiberglass board, also known as epoxy board or glass fiber board, is made by epoxy resin impregnated on fiberglass cloth and cured at high temperature, which has the characteristics of high strength, high modulus, low density, and excellent chemical stability and electri
High Performance Specialty Engineering Plastics--Polyetheretherketone (PEEK)
Basic Properties of PEEK Materials PEEK is a semi-crystalline, thermoplastic aromatic polymer with an impressive array of properties. Polyetheretherketone (PEEK for short) is a new type of thermoplastic material made from 4,4'-difluorobenzophenone and hydroquinone with diphenyl sulfone as solvent, catalyzed by alkali metal carbonate (sodium carbonate or potassium carbonate), after the condensation reaction; as a representative of the polyaryletherketone (PAEK) family, it is at t
How big is the big family of nylon, the most popular of the five engineering plastics? Nylon material is one of the top five engineering plastics, in the high-end engineering plastics materials its attention is very high. Nylon is actually a big family, there are many family members, each with their own characteristics and skills.
Superior Abrasion Resistant FR4 Fiberglass Panel Applications
FR-4 board (FR-4 fiberglass board) is one kind of epoxy fiberglass cloth substrate, it is a kind of substrate with epoxy resin as binder and electronic grade fiberglass cloth as reinforcing material.FR-4 is a code name of flame-resistant material grade, which means that the resin material must be able to extinguish by itself after the combustion state, and the flame-retardant grade can be up to UL94V0 grade, and it passes the ROHS related environmental protection test. It has passed the ROHS test.
What Is PPSU Storage Case For Dental Surgical Instruments
Why is PPSU the ideal material for dental surgical instrument organizers? Here's the answer In the field of dental care, cleaning, sterilizing and properly storing surgical instruments is crucial. Choosing the right organizer material is critical to the safety and efficiency of the procedure. Among many materials, PPSU (polyphenylsulfone resin) stands out for its excellent performance and is the ideal choice for dental instrument organizers. So what is it about PPSU that makes it stand out from its competit
How to Utilize PEEK To Improve The Performance Of Hairdryer?
PEEK (polyether ether ketone) materials are known for their excellent mechanical properties, chemical resistance and heat resistance, and these properties make them ideal for improving the performance of hairdryers. Here are a few ways to utilize PEEK materials to enhance the performance of your hairdryer: 1. Improve heat resistance: the heating element of the hairdryer generates high temperatures when it is in operation, and PEEK can be used
Characteristics And Applications Of Polyimide (PI)
Polyimide (Polyimide, abbreviated as PI) refers to a class of polymers containing an imide ring (-CO-NR-CO-) on the main chain, is one of the best overall performance of organic polymer materials. Its high temperature resistance of more than 400 ° C, long-term use of the temperature range -200 ~ 300 ° C, part of the melting point is not obvious, high insulation properties, 103 Hz dielectric constant 4.0, dielectric loss of only 0.004 ~ 0.007, is F to H class insulation. HONY Plastic can provide super high temperature resistant special engineering plast
Fluorine resin family of PVDF crystalline form, basic properties, synthesis method, application areas and major manufacturers I. Introduction of PVDF Polyvinylidene fluoride (PVDF) resin is an important fluoropolymer product, and is the second largest production and use of fluorine-containing plastics.PVDF resin is made from homopolymerization or copolymerization of vinylidene fluoride (VDF), with a rel
What Is ESD Antistatic PC Sheet ?
Anti-static PC sheet is a colorless and transparent amorphous thermoplastic material Anti-static PC sheet is widely used in the construction of cleanroom plants (semiconductor, LCD, electronics, optics and pharmaceuticals, etc.), cleanroom equipment masking, cleanroom space separation, clean equipment, observation windows and equipment cover, electronic test fixtures, etc. The base material is polycarbonate (Polycarbonate), which is a colorless transparent amorphous thermoplastic material.
Bearing Cage PTFE Vs PEEK Bearing Cage
Bearings, PEEK Bearing Cage PEEK bearing cages, with high temperature resistance, wear resistance, corrosion resistance, self-lubricating and other characteristics of the advantages, and metal materials compared with light weight, low noise, etc. PEEK has the thermoset plastics, heat resistance, chemical stability, and thermoplastic molding and processing of thermoplastics, PEEK long-term use of the temperature of 260-280℃, the short-term use of the temperature can be up to 330 ° C, and high-pre
PSU injection molding VS PPSU injection molding
PSU parts injection molding process Parameters Characteristics Polyphenylene ether sulfone (PSU, also known as PSF) is a high-temperature, high-strength special engineering plastics, with high mechanical strength, electrical insulation properties and a certain degree of chemical resistance, especially thermal aging, creep resistance and dimensional stability is better. PSU parts injection molding process characteristics: 1. PSU injection molded parts is an amorphous polymer, no significant melting point
Is a Gasket the Same as a Washer? Gaskets and washers are often assumed to be the same thing, as they have a similar design and are both used in conjunction with other components. While they have a similar appearance, they serve very different purposes. Gasket vs. Washer: What’s the Difference? Although gaskets and washers share some similarities, they serve different functions. Gaskets are used to prevent le
How Difficult Is It To Process PEEK Materials?
Abstract PEEK material is resistant to high temperature, corrosion, abrasion and high strength, but it is difficult to process, so it is necessary to choose the right tool, optimize the parameters, cooling, humidity control, anti-heat deformation and deburring to improve the processing level.
What Is PEEK CF30 Carbon Fiber Filled Material
The most obvious advantages of PEEK CF30 carbon fiber filled material applications PEEK CF 30 is a 30% carbon-filled PEEK material with carbon fibers that give the material high levels of stiffness and creep strength. Carbon fiber reinforced PEEK has very high mechanical strength values and at the same time a lower density than 30% glass fiber filled PEEK. In addition, carbon fiber composites tend to be less abrasive than glass fibers, while improving wear and friction properties. The addition of carb
Antistatic PEEK :Multiple Ways to Analyze Mechanical Properties
Anti-static PEEK refers to an engineering plastic with anti-static properties, the full name is Polyetheretherketone (Polyetheretherketone, abbreviated as PEEK).PEEK is a high-performance thermoplastic polymer with excellent mechanical properties, high temperature resistance and chemical stability. For antistatic PEEK, its antistatic function is usually realized by adding conductive fillers or antistatic additives to the PEEK base. These additives can make the material conductive, effectively preventing the accumulation and discharge of static electricity, thus protecting electronic equip
What Kind Of Engineering Plastic Is AND?
What is AND an engineering plastic? It refers to polyethylene terephthalate (PETP) plastic. PET plastic is a common plastic material, the Chinese name (polyester) has the following properties: in food use mostly. PETP plastic is the abbreviation for Polyethylene terephthalate, abbreviated PET or PETP. Chinese meaning: polyethylene terephthalate plastic, mainly including polyethylene terephthalate PET and polybutylene terephthalate PBT. polyethylene terephthalate is also commonly known as polyester resin. It is a condensate of terephthalic acid and ethylene gly
What Is ESD Antistatic PA NYLON Sheet ?
What is polyamide and what is anti-static PA? Polyamide, also known as nylon (Polyamide, PA for short), is a general term for thermoplastic resins containing repeated amide groups - [NHCO]. Its name is based on the number of carbon atoms in the synthesized monomer. Nylon is known for its high mechanical strength, stiffness, hardness and toughness, as well as excellent abrasion resistance and good sliding properties, as well as good mechanical vibration damping ability, aging resistance, dimensional stabilit
What Is PEEK Polyetheretherketone Suture Anchors
The material of polyether ether ketone sewing rivets is polyether ether ketone (PEEK). First, the material characteristics Polyether ether ether ketone (PEEK) is a high-performance engineering plastics, with excellent high-temperature strength, abrasion resistance, chemical stability and corrosion resistance, is widely used in aerospace, automotive, medical and other fields. In the manufacture of polyether ether ketone sewing rivets, usually use the same material of polyether ether ketone as the raw material, because this material has high thermal stability and elect
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
