Vesconite shipping information
Shipping Vesconite material to China customer to make parts
Rexolite 2.75" diameter Rod x 4Ft
Rexolite 2.75" diameter Rod x 4Ft Ship to France customer on 2022-6-25
HONY@GPO-3 machined parts to USA customer
HONY@GPO-3 machined parts to USA customer on 2020/6/20
What are the physical properties of polyoxymethylene POM
Polyoxymethylene, a thermoplastic crystalline polymer Known as "Super Steel" or "Saigang" Polyoxymethylene The structure is, the English abbreviation is POM Usually a polymer obtained from formaldehyde polymerization The degree of polymerization is not high, and it is easy to be depolymerized by heat Melting point 175°C Tensile strength (yield) 70MPa Elongation (yield) 15% (break) 15% Impact strength (without gap) 108KJ/m2 (with gap) 7.6KJ/m2 Please send inquiry and drawing to sales@hon
Classification of all models of POM plastic: (1) American DuPont: 23P, 51P, 100, 100P, 4510, 500, 500AF, 500AL, 500BK, 500CL, 500NC, 500P, 500T, 507, 507BK, 525GR, 527UV, 570, 577, 588P, 900, 900P, 90EMP, 988P, 927UV, DE-20076-NC, DE-20171, DE-20199, DE-20242, DE-20266-BK602, DE-8902, DE-8903, DE-9422, DE-14009-HP, DE- 9206BK, DE-20323, DE9422-BK602 (2) Polyplastics Japan: M90-44, M90-45, M90-04, M90-02, M90-35, M90, M90S, M25S, M25-04, M25-44, M270, M270-44, M270-UP , M90-71, CS-20, GB-25, GC-25, GH-25, GH-25D, GR-20, VC-32, KT-20, SU-25, SW-01, SW-22, SW -41, SX-35, CW-01, SF-2
An imported material: Is TURCITE what we often say about steel?
Turcite is a thermoplastic self-lubricating bearing material produced by Variseal bearings group in the United States. It is not a steel material, but a pom material. This series of materials has low cost, chemical resistance, wear resistance, and can be used in a wide temperature range. Inside application. Turcite® A, and Turcite® X are modified materials based on polyoxymethylene. Their performance and application can be comparable to Delrin AF. Turcite® only provides bars. Turcite® A is blue; Turcite® X is red in color. Please send inquiry and drawi
What is the difference between pom plastic and pe plastic
Definition of POM (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure in the molecular chain, it can be divided into two types: homopolyoxymethylene and copolyoxymethylene. The important difference between the two is: homopolyoxymethylene has high density, crystallinity, and melting point, but poor thermal stability, narrow processing temperature range (about 10℃), and slightly lower stability to acid and alkali; while copolyoxymethylene has high density, crystallinity, and The
What is the shrinkage rate of plastic POM+30GF?
The shrinkage rate of POM is about 2%, and the shrinkage rate is 1.6-2.0%. POM (polyoxymethylene resin) definition: POM is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure in its molecular chain, it can be divided into two types: homopolyoxymethylene and copolyoxymethylene. The important difference between the two is: homopolyoxymethylene has high density, crystallinity, and melting point, but poor thermal stability, narrow processing temperature range (about 10℃), and slightly lower stability to acid and
POM has been widely used in electronic and electrical, machinery, instrumentation, daily-use light industry, automobiles, building materials, agriculture and other fields. POM has also shown a good growth trend in other new fields. It is widely used in the manufacture of various sliding and rotating mechanical parts, made into various gears, levers, pulleys, and sprockets. It is especially suitable for bearings, hot water valves, and precision metering. Valves, conveyor chains and rollers, flow meters, automobile internal and external handles, cranks and other window rotating machinery,
What is the hardness of the black POM bar?
POM (Polyoxymethylene): English name Polyoxymethylene, commonly known as Saigang. POM plastic particles are extruded through an extruder at high temperature, and then extruded through corresponding die ports to obtain POM sheets and POM rods of different thicknesses and diameters. POM is a thermoplastic engineering plastic with high melting point and high crystallinity. Due to the good characteristics of POM, it is very suitable for machining on automatic lathes, and is especially suitable for manufacturing precision parts. POM is a linear polymer with no side chains, high density and high cry
Is POM material suitable for bolts?
no problem. ROM POM rod, we use the upper tapping thread M14 fine thread with a diameter of 35, L=10, used to install the forward and reverse buttons of the bright knife electric tapping machine, there is no problem at all, we have processed nearly 800 similar materials Handle. There is no problem with the plasticity and toughness of the POM rod. In addition, if you need a cantilever type electric tapping machine Please send inquiry and drawing to sales@honyplastic.com
POM-C is the abbreviation for Polyformaldehyde-copolymer. Copolyformaldehyde is a copolymerization of formaldehyde molecules and ethylene molecules, of which ethylene molecules account for only 1-5%. This formaldehyde has better toughness than another formaldehyde---homopolyoxymethylene, has lower polymerization difficulty, lower cost, and is widely used. Most of the formaldehyde plastics on the market are polyoxymethylene copolymers Please send inquiry and drawing to sales@honyplastic.com
What material is the POM plug steel rod
POM chemical name: polyoxymethylene, commonly known as: Saigang, super steel, plastic steel, POM is produced in many places, domestically produced and imported, and domestically produced are generally cheaper Please send inquiry and drawing to sales@honyplastic.com
The purpose of POM plastic is to replace most non-ferrous metals, automobiles, machine tools, instrument internals, bearings, fasteners, gears, springs, pipes, conveyor belt accessories, electric water cookers, pump casings, drains, faucets, etc. Definition of POM (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure i
What is the specific difference between plastic PS and POM?
PS, transparent materials, many packaging materials are used, such as lunch box lids, and transparent containers. POM, commonly known as Saigang, has high hardness, high strength, and good self-sliding properties. It is used in gears and other markets Please send inquiry and drawing to sales@honyplastic.com
1. The adhesive strength of Saigang POM conventional glue can't reach. 2. Adhesive glue Saigang POM can be glued with Coule Industry 4211. 3. It is a one-component room temperature curing adhesive, 4. In addition, mechanical fixing methods and glue can also be used as formulas. Please send inquiry and drawing to sales@honyplastic.com
What is the difference between ordinary POM and POM-C
The molecular structure of POM has two types: homopolyoxymethylene (POM-500P) and copolyoxymethylene (POM-FM090) Homopolymer materials have good ductility and fatigue strength, but they are not easy to process. Copolymer materials have good thermal and chemical stability and are easy to process. Both homopolymer and copolymer materials are crystalline materials and are not easy to absorb moisture. Properties: It is a crystalline thermoplastic plastic with an obvious melting point of 165~175°C, and the property is closest to metal. It is generally called plastic steel (Saigang)
Which price is higher, POM or F4?
POM, commonly known as Saigang, is a very common plastic, and its price is relatively low, except for POM with other additives. F4, short for PTFE, that is, polytetrafluoroethylene, is a high-temperature plastic, and the relative price is higher. But the price of the mixture of POM+F4 is higher than that of F4 The performance of the two is not the same, depending on your actual processing requirements for material performance. Please send inquiry and drawing to sales@honyplastic.com
How to eliminate shrinkage holes in pom injection molded products
POM material, also known as Saigang, special steel, because this material is tough and elastic, it is a kind of thermoplastic engineering plastic with high density and high crystallinity Due to its high crystallinity, the shrinkage rate of POM material is quite large, which can reach 2%~3.5%. Therefore, shrinkage and shrinkage of this kind of plastic products are more common, and shrinkage occurs in the areas where the product is relatively thick. The injection adjustment can be improved and it is difficult to eradicate. Perhaps it can be adjusted from the mold struc
POM (Polyoxymethylene) Polyoxymethylene Polyoxymethylene (POM) Polyoxymethylene scientific name Polyoxymethylene (abbreviated as POM), also known as Saigang, special steel. It is obtained by polymerizing formaldehyde as raw materials. POM-H (polyoxymethylene homopolymer) and POM-K (polyoxymethylene copolymer) are thermoplastic engineering plastics with high density and high crystallinity. Has good physical, mechanical and chemical properties, especially excellent friction resistance. POM is a linear polymer with no side chains, high density and high crystallinity, with excellent compre
How much has the Saigang material shrunk?
The shrinkage rate of POM plastic material is 1.6%-4.0%. According to different temperatures and different air pressures, the shrinkage rate is floating. POM plastic is a synthetic resin, also known as polyoxymethylene resin, POM plastic and steel Please send inquiry and drawing to sales@honyplastic.com
Which PE and pom are more resistant to UV rays?
The scientific name of POM formaldehyde is polyoxymethylene (POM), also known as Saigang and Trane. It is obtained by polymerization of formaldehyde as raw materials. POM-H (polyoxymethylene homopolymer) and POM-K (polyoxymethylene copolymer) are thermoplastic engineering plastics with high density and high crystallinity. It has good physical, mechanical and chemical properties, especially excellent friction resistance. Please send inquiry and drawing to sales@honyplastic.com
What is the difference between POM plastic and PE plastic.
Definition of pom (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure in its molecular chain, it can be divided into two types: homopolyoxymethylene and copolyoxymethylene. The important difference between the two is: homopolyoxymethylene has high density, crystallinity, and melting point, but its thermal stability is poor, the processing temperature range is narrow (about 10℃), and the stability to acid and alkali is slightly lower; while the density, crystallinity, and The mel
What material is polyoxymethylene
The scientific name of polyoxymethylene is polyoxymethylene (pom), also known as Saigang and special steel. It is polymerized with formaldehyde as raw materials POM-H (polyoxymethylene homopolymer) and POM-C (polyoxymethylene copolymer) are thermoplastic engineering plastics with high density and high crystallinity. Has good physical, mechanical and chemical properties, especially excellent friction resistance. Please send inquiry and drawing to sales@honyplastic.com
Tel: 86-852-34604012
Whatsapp: 8618680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
