The origin of the development of polyamide
The origin of the development of polyamide Polyamide plastic is developed on the basis of polyphthalamide fiber. It is the first thermoplastic plastic that can bear the load. It is also the variety with the largest output, the most variety and the most versatile among the five general engineering plastics. PA is a general engineering plastic with a long history and a wide range of uses. In 2000, the world engineering plastics market was allocated as PA 35%,
What are the main properties of modified PPS plastics
What are the main properties of modified PPS plastics Modified PPS has very low dielectric constant and dielectric loss. Surface resistivity and volume resistivity are not sensitive to changes in frequency, temperature and humidity. Polyphenylene sulfide is an excellent electrical insulating material. Modified PPS plastic has excellent thermal properties. After adding long glass fiber for modification, the thermal performance index is higher. Modified PPS plastics can also maintain high mechanical properties a
What material is pps PPS is a resin material. PPS is polyphenyl sulfide. It is a thermoplastic resin with a phenylsulfide group in the main chain of the molecule. It is a new type of high-performance thermoplastic resin with high mechanical strength, high temperature resistance, chemical resistance, flame retardancy, and thermal stability. Good, excellent electrical performance and other advantages. It is widely used in the fields of electronics, automobile
The effect of increased crystallinity on injection molded products
The effect of increased crystallinity on injection molded products PPS is a crystalline polymer, the crystallinity varies with the cooling temperatur
What are the processing procedures for plastic processing?
What are the processing procedures for plastic processing? Plastic processing is also called plastic molding processing. It is a general term for various processes that convert synthetic resin or plastic into plastic products, and is a larger production department in the plastics industry. Plastic processing generally includes plastic ingredients, molding, machining, joining, modification, and assembly. The last four processes are carried out
How to ensure 0.015mm accuracy in turning processing of POM material
How to ensure 0.015mm accuracy in turning processing of POM material ? For this material, to ensure 0.015mm accuracy, precision turning is required, the feed rate is controlled, and the speed must be increased. Definition of POM (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemic
How about the processing performance of peek material? What should be paid attention to?
How about the processing performance of peek material? What should be paid attention to? PEEK (polyether ether ketone) resin is a special engineering plastic with excellent performance. Compared with other special engineering plastics, it has many significant advantages, such as high temperature resistance, excellent mechanical properties, good self-lubrication, chemical resistance, flame retardancy, Peel resistance, radiation resistance, stable insulation, hydrol
What are the anti-static materials HONYESD® ?
What are the anti-static materials HONYESD® ? There are mainly the following types of anti-static materials: Korea anti-static board 1. Anti-static plexiglass board (anti-static acrylic board) 2. Anti-static PVC board (anti-static PVC board)
What is the difference between "PMMA Acrylic Board" and "PC Board"?
What is the difference between "PMMA Acrylic Board" and "PC Board"? Both are transparent plastics. In the case of the same thickness and the same raw material particles, the light transmittance of PMMA is 2-3% higher than that of PC, which is close to 90%, which is not easy to distinguish with the naked eye. But the difference in other physical properties between the two is quite big, because after all, they are two kinds of materials.
How to prevent static electricity from acrylic sheet?
How to prevent static electricity from acrylic sheet? There are many kinds of anti-static sheets on the market, and the prices are also different. Many people are often dazzled when they choose. Because they don't understand the performance of various anti-static sheets, they hesitate when choosing. In response to this situation, the following is for everyone to collect some relevant information about anti-static p
PEEK everyone knows that titanium and cobalt-chromium alloys have long occupied the mainstream position in medical implant materials, but the high cost has also restricted their application. In recent years, PEEK materials have been increasingly used in the field of implants due to their excellent biocompatibility, mechanical properties and lower cost. Let's sort out, what is the good thing about PEEK material? PEEK polyether ether ketone is a special engineering
HONY®Bakelite sheet Phenolic laminated paperboard made of bleached wood pulp paper impregnated with phenolic resin grease and hot pressed. HONY®Bakelite: Because of its characteristics of insulation, no static electricity, abrasion resistance and high temperature resistance, Bakelite has become the ins
Introduction of Anti-static Bakelite
Introduction of Anti-static Bakelite Antistatic Bakelite is a kind of filler compound based on phenolic resin, which shows high performance in the application field of antistatic materials. Features: All parts of the anti-static bakelite have the same anti-static value, and the overall resistance value is 10^8-10^10Ω, which has stable anti-static performance.
What are the characteristics of Bakelite?
What are the characteristics of Bakelite? According to the production process of synthetic stone, synthetic stone mainly has the following characteristics (mainly for the synthetic stone with 95% natural marble composition and mature processing technology) 1. There is no color difference. The natural marble seen in the market is directly mined from the mine and is slightly
Can the high temperature resistant bakelite or epoxy board be able to withstand a high temperature of 180 degrees? HONY plastic Bakelite boards are suitable for low frequency circuits. Fiberglass board, also known as epoxy board, is suitable for high-frequency circuits. PF bakelite is also called bakelite and phenolic laminated paperboard. Use high-quality bleached wooden building p
What is Bakelite made of? HONY Bakelite board is also called bakelite board and phenolic laminated paperboard. It uses high-quality bleached wooden building paper and cotton linter paper as reinforcement, and is made of phenolic resin made from high-purity, fully synthetic petrochemical raw materials. Wood boards made of resin adhesives. Synthesis: Phenolic laminated pa
Taiwan Bakelite, Imported Bakelite, Black
Taiwan Bakelite, Imported Bakelite, Black According to the color classification, there are only two types of Taiwanese Bakelite, red and black. Except for the different colors, other properties and characteristics are the same. Compared with domestic products, the price of imported boards is slightly higher, but because of its excellent quality, it still occupies a large sales volume in the market. If some of the better domestic boards still can
Is the bakelite a circuit board? What's the function besides making circuit boards? What is it generally used for? 1. The circuit board has multiple electronic components on the circuit board via patch or plug-in. The circuit board can realize certain electronic functions. 2. The circuit board is PCB is the abbreviation of printed circuit
What is Bakelite? Thermal insulation material, a material that can block the transfer of heat flow, is also called thermal insulation material. Traditional thermal insulation materials, such as glass fiber, asbestos, rock wool, silicate, etc., new thermal insulation materials, such as aerogel felt, vacuum panels, etc.
The 15th Shenzhen International Plastics and Rubber Industry Exhibition 2021
The 15th Shenzhen International Plastics and Rubber Industry Exhibition 20 Shenzhen-the core engine of the Greater Bay Area, a world-class city cluster trillion market The Guangdong-Hong Kong-Macao Greater Bay Area is an international technological innovation center with global influence. Aiming at the frontiers of world technology and industrial development, strengthening the construction of innovation pla
What is the difference between bakelite and fiberglass board, and what are the advantages of each?
What is the difference between bakelite and fiberglass board, and what are the advantages of each? Bakelite boards are suitable for low frequency circuits. Fiberglass board, also known as epoxy board, is suitable for high-frequency circuits. PF bakelite board is also called bakelite board, phenolic laminated board. Use high-quality bleached wooden
What material is ERTALYTE TX PET-P?
What material is ERTALYTE TX PET-P? PETP polyethylene terephthalate is an engineering plastic profile made of crystalline thermoplastic polyester. Hardness, good rigidity, high strength, toughness, low friction coefficient and high dimensional stability. Its operating temperature is between -40 degrees and +110 degrees. It is a Swiss engineering plastic profile made of semi-crystalline thermoplastic polyester. Its brand names are ERTALYTE® (pure grade) and ERTALYTE®TX (filler grade). Main features:
The application and principle of anti-static bakelite
The application and principle of anti-static bakelite Main applications: PCB drilling, fixtures, switchboards, mechanical parts, test benches, SMT technical work benches. Features: All parts of the anti-static bakelite have the same anti-static value, and the overall resistance value is 10^8-10^10Ω, which has stable anti-static performance. After machining or surface wear, the anti-static valu
The main application areas of PEEK
The main application areas of PEEK In the field, the transportation market such as automobiles (including aviation) accounts for about 50% of PEEK resin consumption, semiconductor manufacturing equipment accounts for 20%, compressor valves and other general mechanical parts and components account for 20%, medical equipment and analytical instruments, etc. The market accounts for 10%. 1. Transportation machi
Tel: 86-852-34604012
Whatsapp: 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
