Why choose POM steel for lathe parts processing?

POM racing steel lathe parts are crystalline plastics with obvious melting point. Once the melting point is reached, the viscosity of the melt drops rapidly; when the temperature exceeds a certain limit or the melt is heated for too long, it will cause decomposition.

Moreover, POM Delrin Machined Parts also has good comprehensive performance. It is the hardest in thermoplastics. It is one of the varieties with the mechanical properties closest to metal in plastic materials. Its tensile strength, bending strength, fatigue resistance, wear resistance and electrical The performance is very good, and it can be used for a long time between -40 degrees and 100 degrees.

POM racing steel lathe parts are also tough and elastic, and they still have good creep resistance, geometric stability and impact resistance even at low temperatures.

Both homopolymer and copolymer materials are available. Homopolymer materials have good ductility and fatigue strength, but are not easy to process; copolymer materials have good thermal stability, chemical stability and are easy to process; both homopolymer materials and copolymer materials are Crystalline material and does not readily absorb moisture.

The high degree of crystallization of POM racing steel lathe parts leads to a relatively high shrinkage rate, which can reach as high as 2% to 3.5%. There are different shrinkage rates for various reinforced materials.