What are the characteristics of ABS sheet ?

What are the characteristics of ABS sheet ?

Food industry parts, architectural models, hand board production, phase electronic industry parts, refrigerator refrigeration industry, electronic and electrical fields, pharmaceutical industry, automotive parts (instrument panels, tool doors, wheel covers, mirror boxes, etc.) Radio shells, telephone handles, high-strength tools (vacuum cleaners, blowers, mixers, lawn mowers, etc.) , typewriter keyboards, recreational vehicles such as golf carts and jet skis, etc.

What are the characteristics of ABS?

1. ABS sheet has excellent mechanical properties, excellent impact strength and can be used at very low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance and can be used for bearings under medium loads and rotational speeds. the creep resistance of ABS is greater than PSF and PC, but less than PA and POM. the bending strength and compressive strength of ABS are poorer among plastics. the mechanical properties of ABS The mechanical properties of ABS are greatly affected by temperature.

2. ABS sheet is not affected by water, inorganic salts, alkalis and various acids, but is soluble in ketones, aldehydes and chlorinated hydrocarbons and is subject to stress cracking due to glacial acetic acid and vegetable oil. ABS has poor weather resistance and is easily degraded by ultraviolet light. Outdoor for six months, the impact strength decreases by half.

Anti-static ABS sheet

3. ABS sheet has excellent impact strength, good dimensional stability, dyeability, good molding processability, high mechanical strength, high rigidity, low water absorption, good corrosion resistance, simple connection, non-toxic and tasteless, excellent chemical properties and electrical insulation properties. It is heat resistant, non-deformable and has high low temperature impact toughness. It is also a hard, scratch-resistant and deformation-resistant material. Low water absorption; high dimensional stability. Conventional ABS sheet is not very white, but has very good toughness. It can be sheared by shearing machine or stamped by die.

4. The heat deformation temperature of ABS sheet is 93~118℃, and the product can be increased by about 10℃ after annealing. ABS still shows certain toughness at -40℃, and can be used in the temperature range of -40~100℃. Among them, the transparent ABS board transparency is very good, polishing effect is relatively good, is to replace the PC board first will material. Compared with acrylic, the toughness is very good, and can meet the needs of fine processing of products.