Excellent Performance of PPSU Materials in Food Applications
What is PPSU and is PPSU a food grade plastic? PPSU is an amorphous thermoplastic that is highly transparent and hydrolytically stable. The product can withstand repeated steam sterilization. PPSU, scientific name: Polyphenylene sulfone resins (Polyphenylene sulfone resins) PPSU polyphenylene sulfone resins are Polysulfone (P
Carbon graphite material has self-lubrication, high mechanical strength, low coefficient of friction, high temperature resistance, good anti-wear, widely used in machinery, chemical industry, petroleum, instrumentation, pumps and other fields. Conventional graphite materials are less than ideal in terms of wear resistance and corrosion resistance, while silicified graphite, as a novel engineering material, has the properties of both carbon graphite and silicon carbide, and is used in a wide range of applications.
Semitron Esd Antistatic Material
SEMITRON ESD series products (anti-static series) are widely used in some sensitive electronic components. There are 8 types of SEMITRON ESD products, which are specially designed to solve the static electricity problems arising from the operation of equipment, and all of them can be supplied by HONY Plastic as original products: 1. SEMITRON ESD 520HR PAI Taupe Gray (Anti-static PAI);
What is the difference between PEEK and fluoroplastics? PEEK and fluorine plastic difference is very obvious. Temperature resistance: PEEK melting point of 334 degrees, heat distortion temperature of more than two hundred nearly 300 degrees, long-term use temperature of 260 degrees
What is MC Nylon Pulley MC nylon pulley is a liquid that is heated into a mold and then molded at high temperatures, often called cast nylon. It is a widely used engineering plastic in almost the entire industrial field. It is a casting product formed by using anionic polymerization reaction technology, in which dissolved caprolactam monomers with catalysts are poured under atmospheric pre
Advantages and areas of application of Spring Seals
What is a Variseal? Spring Seal (Spring Seal/ spring energized seal/ Variseal) is a high-performance seal with a special spring inside a U-shaped Teflon seal, where the sealing lip (face) is pushed out by the appropriate spring force coupled with the fluid pressure of the system and gently pressed against the metal surface to be sealed to produce a very excellent sealing effect. The actuation effect of the sp
Characteristics and Applications of PA66+GF Materials
Characteristics and applications of PA66+GF materials Performance Advantages 1. High strength: PA + 30% GF material strength is very high, much higher than the general strength of plastic materials, its tensile strength of up to 100MPa or mor
PEEK Vs. PTFE In The Sealing Industry
PEEK Sealing Ring/PEEK Seal Ring Overview PEEK sealing ring has good performance, stable size, specification size can be customized, high temperature resistance, abrasion resistance and strong mechanical properties. High temperature resistant PEEK has a high glass transition temperature and melting point (334°C), which is one of the reasons it can be reliably used in applications where he
Applications and Features of Plastic Balls
What is a plastic ball? Plastic balls are spherical objects made of plastic that have a wide range of applications and diverse functions. They can be made from various types of plastics such as polyethylene, polypropylene and polyvinyl chloride. Plastic balls are mainly categori
What is ESD Bakelite ? Antistatic Bakelite board is a filler compound based on phenolic resin, which shows high performance in the field of application of antistatic materials. Its inherent characteristics are high mechanical strength, superior abrasion resistance, and intermediate electrical insulation.
What are the materials for optical lenses?
In our daily life, we often see a variety of lighting fixtures, some lamps and lanterns are the use of reflectors to achieve illumination distribution, such as common flashlights, and some are the use of lenses to achieve illumination distribution, such as LED street lamps, as well as some scenic lighting.
TECAPEEK CF30 black CARBON FILLED PEEK and HONYPLAS PEEK CF30
What is TECAPEEK CF30 black CARBON FILLED PEEK ? PEEK CF 30 is a 30% carbon filled
PEEK Compressor Valves for Smoother Breathing
What is Valve ? Piston compressor valve is used for suction and exhaust with its working principle is to rely on the piston up and down to start generating suction and exhaust, the piston down is suction, up is the exhaust suction is the outside of the gas sucked into the piston, by the piston to the compression and then discharged into the cylinder, such a return back and forth coupled with high-speed operat
The process and application advantages of PMMA lampshade products
What is an acrylic lampshade PMMA, also known as acrylic, is commonly known as "plexiglass", which has excellent optical properties and weather resistance. The penetration of white light is as high as 92%. It has room temperature creep characteristics, and as the load increases and the time increases, it can lead to stress cracking. PMMA has good impact resistance properties. PMMA
PEI The replacement of PEEK, the upstart in the dielectric field
What is PEI? Polyetherimide, referred to as PEI, the English name is Polyetherimide, and its appearance is amber. It is an amorphous thermoplastic special engineering plastic that introduces flexible ether bonds (-R-O-R-) into rigid polyimide long-chain molecules.
The commonly used substrates for PCBs : FR4
What is FR4 ? FR-4, one of the commonly used substrates for PCBs, is a code name for a flame-resistant material grade, which means that the resin material must be able to self-extinguish after the combustion state of a material specification.FR-4, also written as FR4, is both a name and a standard grade. The organic substrate material used to manufacture PCBs consists of three components:
Chemically stable, high-strength, high-stiffness PEEK valve discs effectively extend component life
Chemically stable, high-strength, high-stiffness PEEK valve discs effectively extend component life Valve plates are critical components of reciprocating compressors and directly affect their efficiency and reliability. When using steel with significantly shorter se
Several common wave soldering fixtures and their respective characteristics of what?
What is wave soldering jig? Wave soldering jig is a classification of the tin furnace jig, mainly refers to the wave soldering process, used to carry the PCB board over the tin furnace and complete the soldering operation of the jig, we usually also call it reflow soldering jig.
PEEK Enables Lightweight Alternative Metal Aerospace Materials
PEEK Polymerization | Compounding| Extrusion | Compressed molding | Injection molding | Machining in Aerospace Industry In the field of aerospace, aerospace components for the material requirements are very high, so the material performance must meet the requirements of the actual application, and can maintain excellent performance fo
What are the advantages of PC lenses?
What are the advantages of PC lenses? PC lenses are also called "space lenses" and "cosmic lenses", the chemical name is polycarbonate, which is a thermoplastic material. That is, the raw material is solid, heated and shaped into a lens, so this lens will be deformed by excessive heat after the finished product is not suitable for high humidity and heat occasions, PC lens has a strong toug
Detailed introduction of PMMA or acrylic
What is PMMA? PMMA or acrylic is a widely used transparent plastic material known for its use in a variety of markets from car windows and smartphone screens to aquariums. It is a tough plastic that is easy to mold and is an excellent alternative to high-cost and less resilient glass.
Modified polytetrafluoroethylene (PTFE) filled products processing and application range
In order to meet the needs of different working environments, suspension polymerized PTFE resins and various fillers are usually mixed into filled PTFE resins to make various types of filled PTFE profiles. The filler media usually include: glass fibers, carbon fibers, copper powder and lubricants (graphite, molybdenum disulfide), with high compressive strength, wear resistance, good thermal conductivity and low thermal expansion.
What types of machining are commonly used for PTFE parts processing?
Commonly used machining methods for PTFE parts processing are: Molding Molding is suitable for processing simple parts directly in a single molding (no additional processing required). Basic shapes include blocks, small plates (square or rectangular), and short rods/tubes. Sh
High Performance Excellent Sealing of PEEK Connectors
What is PEEK connectors ? PEEK is a thermoplastic, semi-crystalline material with excellent mechanical and chemical resistance that remains unchanged at elevated temperatures.PEEK has a glass transition temperature of approximately 143 °C (289 °F) and a melting point of approximately 343 °C (662 °F). This
Tel: 86-852-34604012
Whatsapp: 8618680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
