What are the advantages of MC oilon green nylon?

What are the advantages of MC oilon bar green nylon?

As an engineering plastic, MC oily and wear-resistant nylon has many advantages:

1. Its weight is only 1/7 of the manganese steel liner, which greatly reduces the weight of the inner cylinder. It reduces unnecessary strength and dynamics between components and reduces moment of inertia. It is also very convenient to assemble, disassemble and maintain.

2. When used in mechanical equipment, silos, hoppers and mixing barrels, reduce noise by 10-15 decibels. It can protect the physical and mental health of post workers.

3. Excellent mechanical properties MC oil-containing nylon crystallizes below its melting point and has a large molecular weight, so its mechanical strength is much higher than that of ordinary nylon 6 and nylon 66 products, especially with better creep resistance and fatigue resistance, so It can withstand heavy loads for a long time without deformation.

4. MC oil-containing nylon products with good resilience can prevent long-term deformation of the curved surface, keep it tough, and resist fracture caused by repeated impact loads. It is very necessary for products that withstand high impact loads.

5. MC oil-containing wear-resistant nylon has excellent wear resistance and self-lubricating properties, and can be used under general conditions of light load and low speed without adding lubricant. The characteristic of nylon is that after a certain period of use, the wear is reduced, and there is little wear and tear in the later period. In addition, the friction coefficient of MC oily and wear-resistant nylon is 0.3-0.4. In addition, due to the low self-lubrication and water absorption of MC oily nylon, it has self-cleaning properties that are difficult to combine with other materials.

6. Long service life Due to good wear resistance and low friction coefficient, the service life is 3-6 times longer than that of manganese steel liners.

Because MC oil-containing nylon has the above advantages, good high temperature resistance (easy to use for a long time below 150 degrees Celsius, and the high temperature service temperature is 200 degrees Celsius), and the characteristics of not bonding with other materials, it can be widely used in primary and secondary mixtures in the sintering industry barrels, distributors, mixing silos, fine powder silos and ore troughs.

For any inquiry please contact sales@honyplastic.com or WhatsApp (86)186680371609