FR4-glass Fibreboard Traveller Wheels

FR4-glass fibreboard traveller wheels: wear and moisture resistant, milling, drilling and milling with CNC machining centres

FR4-Glass Fibreboard Traveller Wheel: wear and moisture resistant, milling, drilling and milling with CNC machining centres! The materials used for touring wheels include blued steel, stainless steel and epoxy board. Among them, FR4-glass fibre board is also a kind of insulating board, also called "glass fibre board" and "epoxy resin board".FR4-glass fibre board touring wheel has the advantages of high temperature resistance (180~200℃), moisture resistance, good mechanical properties and dielectric properties, etc. Common colours are white, white, white and white. The common colours are white, yellow, black, aqua green, etc. FR4-glass fibre optic wheels are also called "polishing jigs" and "polishing pads", and they are a kind of fixture used for flat polishing process of lenses, silicon wafers, hard disks and glass.

FR4-Glass Fibreboard Touring Wheel adopts the characteristic advantages of the raw material epoxy resin:

1.Followed by good strength: epoxy resin and amine reaction, the structure produces hydroxyl, good adhesion to other materials.

2.Very good mechanical properties: epoxy resin itself has a very good cohesion, mechanical strength is better than the general resin.

3.Good processing performance: hardening does not produce volatile substances, suitable for different processing conditions.

4.Low hardening shrinkage: shrinkage rate of 1~2%, the smallest among thermosetting plastics.

5.High chemical stability: can tolerate a variety of acids, alkalis, salts and other materials corrosion.

6.Good electrical properties: volume resistance of about 1015ohm-cm or more.

7, Good heat-resistant properties: cured material heat-resistant 100 ℃, special heat-resistant grade resin can be heat-resistant to more than 200 ℃.

How does the FR4-Glass Fibreboard Traveller Wheel work?

Mechanical and chemical reaction methods are used to treat the objects, making the originally rough surface smooth. When our FR4-Glass Fibre Plate Crossover Wheel is running at high speed, the surface of the product to be polished produces rolling, trace cutting force, so that the bump will slowly become flat, and become very smooth.

FR4-glass fibre plate touring wheel production process development and change?

1, the early FR4-glass fibreboard traveller wheels are made by moulding method, because there is no demand for honed workpieces, so the choice of stamping production.

But this method of production of the vernier wheel there is a rough texture, scrap rate of high determination.

2.With the continuous innovation of technology, FR4-glass fibreboard planetary wheel can be completely processed by insulated parts machining centre, which has the advantages of high precision (within 0.02mm), smooth edges, no burrs, no machining traces and so on. We only need to convert the drawings into codes and input them into the computer to achieve automatic machining, high efficiency, accurate size, no deviation. HONY Plastic has the insulated parts machining centre MF1325, table size 1300 x 2500mm; vacuum table, suction and clamping dual-use; servo disc tool changer, tool change speed of 3 seconds; it can achieve high-speed, high-gloss, high-precision machining.