FR4-Glass Fiberboard Star Cruiser

FR4-glass fiberboard traveler wheel: wear-resistant, moisture-resistant, milling, drilling and milling with CNC machining centers

FR4-Glass Fiberglass Plate Star Wheel: wear-resistant, moisture-resistant, milling, drilling and milling with CNC machining centers. The materials of the stargazer wheel include blued steel, stainless steel and epoxy plate. One of the FR4-glass fiberboard is also a kind of insulating board, also called "fiberglass board" and "epoxy resin board". FR4-glass fiberboard touring wheel with high temperature resistance (180 ~ 200 ℃), moisture resistance, good mechanical properties and dielectric properties, etc. Advantages, common colors are white, white, white, white, white, white, white, blue, white, white, white, white. Advantages, common colors are white, yellow, black, aqua green, FR4 - fiberglass plate planetary wheel is also called "polishing jig", "polishing pads", is a kind of flat polishing process for lenses, silicon wafers, hard drives, glass and other fixtures.

FR4-Glass Fiberboard Star Wheel is made of epoxy resin, which is the raw material of FR4-Glass Fiberboard Star Wheel:

1. Followed by good strength: epoxy resin and amine reaction, the structure produces hydroxyl, good adhesion to other materials.

2. Very good mechanical properties: epoxy resin itself has a very good cohesion, mechanical strength is better than general resin.

3. Good processing performance: hardening does not produce volatile substances, suitable for different processing conditions.

4. Low hardening shrinkage: shrinkage rate of 1~2%, the smallest among thermosetting plastics.

5. High chemical stability: can tolerate a variety of acids, alkalis, salts and other materials corrosion.

6. Good electrical properties: volume resistance of about 1015ohm-cm or more.

7. Good heat-resistant properties: cured material heat-resistant 100 ℃, special heat-resistant grade resin can be heat-resistant to more than 200 ℃.

FR4-glass fiberboard traveler wheel working principle?

The mechanical and chemical reaction methods are used to treat the object, making the original rough surface smooth. When our FR4-Glass Fiberglass Plate Crossover Wheel is running at high speed, the surface of the product to be polished generates rolling, micro cutting force, so that the bumps will slowly become flat and become very smooth.

FR4-glass fiberboard traveler wheel production process development and change?

1. The early FR4-glass fiberboard traveler wheel is molded method to produce, because there is no demand for polished workpiece, so the choice of stamping production.

However, this method of production of the vernier wheel there are rough texture, scrap rate is high to determine.

2. With the continuous innovation of technology, FR4-glass fiberboard planetary wheel can be completely insulated parts machining center for processing, insulated parts machining center with high precision (within 0.02mm), smooth edges, no burrs, no machining traces and other advantages. We only need to convert the drawings into codes and input them into the computer to realize automatic machining with high efficiency, accurate size and no deviation.HONY Plastic has the insulated parts machining center MF1325, with a table size of 1300×2500mm; vacuum table, suction and clamping for dual-use; servo disc cutter magazine, with a tool-change speed of 3 seconds; it can realize high-speed, high-gloss, and high-precision machining.

HASSFULL-MF1325 Insulated Parts Machining Center