CNC Machining In Bakelite

How is the bakelite processing ?

Electric wood boards are widely used. How does it process it? It is definitely not possible to use ordinary manual machines. We all know that the density of the electric wood board is very high, so it is very hard. How does the electric wood board process it? There are many ways to process the wooden board. You can clearly tell the processing method after seeing the drawings. (CNC carving machine carving, CNC drilling bed drilling, can also be engraved, milling surface, CNC processing center processing).

It can be used for processing electric wood. Use tungsten steel knife or PCD knife. The white steel knife cannot be used. Don't speed up too fast. Give 1-10 meters (depending on the power of your main axis, the diameter of the knife, and the depth of cutting depth, generally 3-4 mm suitable.) Pay attention to the crumbs during processing, otherwise the dandruff is piled on the workpiece, and the large plate-shaped workpiece will meet Deformation, the product will deform for a period of time, which is affected by temperature and humidity. Do not use coolant. It cuts the crumbs and is easy to block the pump. If you want to cool the effect better, and ensure that there will be no wolf in the workshop, it is good to use the fog but not water. To add some rust -proof cutting fluid to the water to protect the machine tool stainless. If you want to process products with high flat flatness, you must use vacuum suction cups. Electric wood with poor quality is severe. The poor color is heavy, stinky during cutting, easy to layer, not delicate.

Electric panels are also called vessels. It is a phenolic layer pressure cardboard, that is, phenolic cardboard. It is made of high -quality bleach and cotton paper as a reinforcement. The phenolic resin is made of a cardboard for resin adhesive.

Due to the characteristics of insulation, no electrostatic, wear resistance, and high temperature resistance, electro -panels have become the insulation switch and variable resistance, mechanical molds and production lines for electronic products, and can be used in transformer oils. Essence Electric wood is a kind of artificial synthetic chemical. Once heated, it can no longer be shaped into other things, because it has the characteristics of non -water absorption, non -conductivity, high temperature resistance, and high strength. Therefore, it is named. Electric panels are suitable for the neutral and insulated structure parts with high mechanical performance requirements. The mechanical strength is good. It is mainly used in ICT, ITE therapy. The processing of insulation components in the ITE tool, testing , silicone rubber key mold, the treatment board, mold splint, countertop grinding pad, packaging machine, tea tray comb, etc.

Under the temperature of the electric wood plate, the electrical performance is good at room temperature, the mechanical processing performance is good, the proportion is 1.45, and the warranty degree is ≤3 ‰. It has excellent electrical, machinery and processing properties. Paper electric wood boards are the most common layer pressure plates and are the most widely used industrial layer pressure plates in the world.

The main characteristics of the electric wood board are good mechanical strength, anti -static, and intermediate electrical insulation. It is made of phenolic resin, which is made of phenolic resin, which is baked and hot. This product is suitable for insulating structure parts in motors and electrical equipment with high mechanical performance requirements and can be used in transformer oil. The mechanical strength is good. It is suitable for the PCB industry drilling panel, power distribution box, treatment board, mold splint, high and low voltage wiring box, packaging machine, comb, etc. Suitable for motors, mechanical molds, PCB, ICT governance. Model, drilling machine, table grinding pad.

How to process the bakelite is not easy to break the knife?

As we all know, the electric wood board is widely used by the mechanical and electrical industry due to insulation, high temperature resistance, high hardness, high hardness, and is widely used by the mechanical and electrical industry. Complicated processing equipment, once the operation is wrong, it is easy to cause a knife, causing waste of time and a waste of knife.

1. Choose tungsten steel knife expensive, tungsten steel knife strong hardness, strong toughness, easy processing

2. According to the thickness of the electric wood board, select the props size. If the thick electric wood board, the 6mm knife is more suitable. Too small tools. Because the blade is too high to the knife clip, the knife is very easy to break.

3. Do not clamp the blade of the knife clip, and the blade can easily lead to unevenness of the carving knife, and it is easy to break the knife.

4. Do not click to stop at the carving machine. Click to stop the sculptor sculpting head to stop rotating immediately, causing the knife to break