Various Film Molding Methods And Characteristics
There are many varieties of plastic films, which can be used in agriculture, daily necessities, pharmaceuticals, construction and water treatment, solar power generation, battery diaphragm, bullet-proof glass and many other fields according to their different characteristics. Film Molding Methods
Structure, Properties, Classification, Modification, Application and Molding Of PMMA
I. Structure and Properties of PMMA 1. Molecular structure and properties Polymethyl methacrylate, English name polymethyl methacrylate, PMMA, commonly known as plexiglass, acrylic, by MMA monomer and a small amount of acrylate copolymerization of non-crystalline plastics, with good transparency, optical properties, weathering, chemical resistance, impact resistance and aesthetics and other characteristics, is known
What Is Fluoroplastic Material?
What is fluoroplastic? Fluoroplastics are plastics that contain fluorine atoms in their molecular formula. Fluoroplastics are made up of individual fluorine-containing materials. For example, tetrafluoroethylene, hexafluoroethylene, trifluoroethylene chloride, vinylidene fluoride, and fluorine vinyl, etc., are produced by homopolymerization or copolymerization reaction. Accompanied by the continuous progress of polymer materials technology, the types of fluoroplastics have been gradually increased, and
PEEK Seals and Valves - Why Choose PEEK Manifolds for High Temperature and High Load - PEEK Manifolds are Chemically Resistant and Dimensionally Stable Considered one of the strongest materials in the polymer field, PEEK (polyether ether ketone) not only has a tensile strength in excess of 100Mpa, but can also withstand compression loads in excess of 300Mpa, making it strong enough for high load, wear and tear, and high rotational speed applications, where steel mating materials can be used without wor
Modifications And Uses of Polyetheretherketone PEEK
Application areas of PEEK PEEK is widely used in electrical and electronic, mechanical, aerospace, automotive and other fields. (1) Electrical and electronic PEEK is mainly used for wire covering, magnetic conductor covering, high temperature lugs, motor insulating materials, integrated circuit wafer support, etc.: ① wire covering; ② magnetic conductor covering; ③ high temperature
Structure And Molding Processing Of Polyether Ether Ketone PEEK
Polyether ether ketone (PEEK) is a semi-crystalline, linear aromatic polymer compounds developed by the British Imperial Chemical Industries (ICI) in 1978, by the ether bond, aryl ring, carbonyl alternately connected to form a thermoplastic ultra-high-performance special engineering plastics. the molecular structure of the main chain of the PEEK contains a large number of benzene rings, its own C-O bond is relatively soft, the two benzene ring larger bit resistance. The C-O bond is relatively soft, and the two benzene rings have large site resistance to effectively protect the C-O bond f
Carbon Fiber Reinforced PPS As Alternative To PEEK
Industrial applications for engineering thermoplastics such as PC and high performance thermoplastics such as PEEK are growing. In 3D printed filament form, these materials offer a lightweight alternative to metals such as steel and aluminum in industries such as aerospace and energy. Reinforcing these high-performance plastics with additives can further improve their performance. For example, short-cut carbon fibers add strength and stiffness and can be added to low to mid-priced engineering plastics as well as high-performance plastics. As long as the 3D printer nozzle can handle abras
Classification And Properties Of Polyethylene
Classification and Characteristics of Polyethylene There are two types of polyethylene according to density: HDPE with a density of 0.94 ~ 0.97 g/cm3 and LDPE with a density of 0.91 ~ 0.935 g/cm3. There are three types of polyethylene according to the traditional production methods, i.e., low-pressure polyethylene, medium-pressure polyethylene and high-pressure polyethylene. High-density polyethylene (HDPE) is made by polymerizing ethylene at atmospheric pressure or ten
Structure And Properties Of Polyethylene
Polyethylene (Polyethylene , referred to as PE) is a thermoplastic resin produced by polymerization of ethylene monomer. In industry, also includes ethylene and a small number of a-olefin copolymers. Polyethylene odorless, non-toxic, feel like wax, with excellent low-temperature resistance (the lowest use temperature up to -100 ~ -70 ° C). Good chemical stability, because the polymer molecule through the carbon - carbon single bond connection, can resist most of the acid and alkali erosion (not resistant to oxidizing properties of the acid). Insoluble in common solvents at room temperat
PEEK Parts Precision Machining PEEK Sealing Ring
PEEK sealing ring is a sealing ring made of polyether ether ketone PEEK material injection molding processing molding, PEEK sealing ring is usually used in sealing applications that require high temperature, high pressure, and strong corrosive use conditions, peek sealing ring has a wide range of applications in the chemical, petroleum, pharmaceutical, and food processing industrial fields. Advantages of PEEK sealing ring: High temperature performance: P
Introduction of PTFE, PFA, ETFE, PCTFE, PVF, PVDF, Etc.
Basic properties of fluoroplastics Fluoroplastics was founded in 1934, Schloffer, Scherer found polychlorotrifluoroethylene (PCTFE), in 1938 DuPont's R.J. P1unkett found polytetrafluoroethylene (PTFE) and industrialized in 1949. Following the British ICI, Germany's Hoechst, Japan's Daikin Industries, Italy's Montefluos and other successive production. China's fluorine plastic was successfully developed in 1958, first industrialized in Shanghai, after the 80's countries have increased production capacit
Basic Properties And Molding of ABS Resins
ABS resins are ternary copolymers consisting of acrylonitrile (A), butadiene (B), styrene (S), and modified resins, and are called ABS plastics. The plastic made from ABS resin is called ABS plastic, ABS has the rigidity, drug resistance and heat resistance of polyacrylonitrile, the molding performance and appearance of polystyrene, and the impact resistance and cold resistance of polybutadiene.ABS is a light-yellow granular or powder opaque resin, non-toxic, odorless, lightweight, with a density of 1.04-1.07g/cm3, excellent impact resistance, good low temperature performance and chemica
Properties And Application Of Polyphenylene Sulfide (PPS)
Polyphenylene sulfide (PPS) is a linear polymer compound composed of benzene ring and sulfur atoms arranged alternately, it is the sixth largest engineering plastics after polyamide, polyformaldehyde, polycarbonate, thermoplastic polyester, polyphenylene ether, it has better heat resistance, drug resistance, mechanical properties and electrical properties and flame retardant. In the special engineering plastics, PPS than polyarylate, polyether ether ketone, polyethersulfone, polyimide, fluoroplastics and other development speed. PPS can be processed throu
Basic Properties Of Ultra-high Molecular Weight Polyethylene (UHMWPE)
Ultra-high molecular weight polyethylene (UHMWPE) generally refers to polyethylene with a relative molecular mass of 150×104 or more, and is a new type of engineering plastics. The density of UHMWPE with an average relative molecular mass of 200×104 is only 0.935g/cm3, which is lower than that of all other engineering plastics, generally more than 50% lower than that of PTFE, and more than 30% lower than that of paraformaldehyde, so its products are characterized by light weight. UHMWPE has a variety of excellent mechanical properties, physical properties, chemical properties, very wea
Mechanical, Electrical, Thermal and Chemical Properties of Polyamide (PA) Resins
Polyamide (PA) is a high molecular compound synthesized from lactam, fatty carboxylic acid, fatty amine, or aromatic dibasic acid, aromatic dibasic amine, containing amide groups (-NHCO-) in the main chain. Polyamide is tough angular semi-transparent or milky white crystalline resin, as an engineering plastic polyamide's relative molecular mass is generally (1.5-3) × 104. Polyamide has high mechanical strength, high softening point, heat resistance, low friction factor, abrasion resistance, self-lubricating, vibration absorption and anechoic, oil resistance, weak acid resistance, alkali
Mechanical Thermal Electrical Chemical Properties of Polyoxymethylene (POM)
The basic properties of polyoxymethylene (POM) Paraformaldehyde is a linear polymer with high melting point, high density, crystalline, containing -CH2 -O- links in the main chain of the molecule without side chains, with milky white or light yellow appearance. It can be divided into two categories: one is a copolymer of paraformaldehyde and a small amount of dioxane, called copolyformaldehyde; the other is a homopolymer of formaldehyde or paraformaldehyde, called homopolymer of paraformaldehyde. Although there are differ
Know Clear About Rulon® J (Gold) Material
What is Rulon Grade J? Rulon ® J is dull gold in color and provides one of the lowest coefficient of friction of all Rulons, and provides good wear and abrasion resistance. Because this grade is "all plastic", it can be run on non-ferrous and non-metallic mating surfaces such as 316 Stainless, brass, and other plastics. Color Dull Gold Performance
GPO3 Insulation Board Use Standard
GPO3 insulation board use standard GPO3 insulating board is a kind of molding material with high mechanical strength and excellent insulating property. It is widely used in electric power, electronics, transportation, metallurgy and other fields, and is an ideal electrical insulation material. The material of GPO3 insulating board is glass fiber reinforced unsaturated polyester resin, with smooth surface, uniform c
PEEK Materials In The Aerospace Industry
With the rapid development of aerospace technology, there are more and more requirements for light weight, high strength, high temperature resistance, chemical corrosion resistance and other properties of materials. Polyether ether ketone (PEEK), as a high-performance engineering plastics, has always stood at the top of the pyramid of material performance, known as the "soft gold of plastics", because of its excellent physical and chemical properties, in the aerospace field has been widely used.
Impact Of Thickness And Specification On Price Of FR4
In the electronics manufacturing industry, FR4 materials are popular for their excellent electrical properties, mechanical properties, and heat resistance. FR4 sheet, an important form of this material, is priced according to a number of factors, the most notable of which are the thickness and size specifications of the sheet. In this article, we will explore in detail the relationship between FR4 sheet price and thickness and size specifications, and how this price range affects the market. First of all, we need to understand the basic characteristics of
In the vast starry sky of materials science, Teflon (PTFE, polytetrafluoroethylene) and CycloMetal (POM, polyoxymethylene) are like two bright stars, each with its unique physical and chemical properties, in the field of engineering plastics to occupy a place. Today, we will discuss in depth the differences in hardness between these two materials, as well as their unique advantages in their respective fields of application. Teflon's "tenderness": the perfect blend of
Five Popular Engineering Plastics For High Temperature Resistance
Preface Engineering plastics are a class of polymer materials with excellent performance, which are widely used in many fields. Among them, the super high temperature engineering plastics is because of its excellent high temperature resistance characteristics and attract attention. The following is an introduction to five kinds of super high temperature resistant engineering plastics.
Precautions For CNC PEEK Material Processing
CNC machining, on the other hand, is commonly used to process PEEK in a way that PEEK shapes are stronger and harder than most plastics, but softer than most metals, so there are some tips to keep in mind when machining. 1. Select the appropriate cutting tool and machining parameters: Because PEEK material has a high degree of hardness and toughness, so it should be milling with a smaller feed to ensure processing efficiency and accuracy, and to avoid tool damage as much as possible. U
What Is The Water Resistance Of Glass Fiber Reinforced PA6 Material?
PA6 material is a porous material, and its water resistance is affected by many factors, such as the quality of the material itself, the type and quantity of additives and their treatment during processing. In this matter, is the glass fiber reinforced PA6 material strong in hot water resistance? Is glass fiber reinforced PA6 material resistant to hot water? Explore the water resistance of PA6 material. First, the introduction of PA6 material PA6 material is a high-perfo
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
