Know Everything About PEEK High Performance Gears

PEEK Gear Processing_Solutions for the High Performance Gear Industry

When you are looking for non-metallic gears, there are a few different options such as PEEK gear machining parts, POM gears, and nylon gears. The main question to ask yourself when deciding which material is right for you is what application you will be using them in. For example, PEEK is much stronger than nylon and usually due to the application we use different plastics but the most common are PEEK, POM and nylon.

PEEK Gear Machined Parts

PEEK is a relatively new material in the field of mechanical gears. It has been used in aircraft applications for over 40 years. These properties are necessary for aerospace and defense applications.

The most notable characteristics of PEEK gears are their strength and stiffness at high temperatures and their ability to operate at high speeds. These two properties make PEEK an ideal material for high temperature, high load precision mechanical parts.

Operating temperatures typically range from -60°C to 260°C (-76°F to 500°F). It is important to select the correct grade based on application parameters and allowable service temperatures.

POM Gear Machining Parts

POM is the perfect material for producing gears because it is a very durable material and lightweight. Due to its strength and durability, paraformaldehyde is often used in different industries such as the medical field, sporting goods, tools and hobbies. Over the years, paraformaldehyde has become an increasingly popular material for gear production.

Nylon Gear Machining Parts

Nylon is also the most popular material for gears and other parts because it is lightweight, durable, easy to clean and inexpensive. The material also shows high impact strength and resistance to many oils. However, it should be mentioned that nylon exhibits a relatively high rate of water absorption. If you use nylon in your gear, you need to make sure everything stays dry when wet.

To summarize

PEEK gear parts are lightweight, flexible, and can withstand high temperatures, making them an excellent choice for gears that are subjected to rigorous movement.POM is also a good choice for gears that are both inexpensive and chemically resistant.Both PEEK and POM have good thermal stability while remaining relatively easy to manufacture using most modern molding processes.