Inventory of Mitsubishi Chemical High-Tech Materials Polyamide (Nylon) Series

Nylon Materials Are "Reinventing" the Future

MCAM Products

Nylon Series

As one of the most widely used engineering plastics of the first generation, nylon has a strong vitality.

Especially after different processes and modifications, it can meet the strong demand for high-performance materials and products in the automotive industry, aerospace, shipping, intelligent equipment, construction, digital technology and other fields with stronger thermal, mechanical, flame retardant and barrier properties.

For a long time, MCAM has been deeply cultivating the material field, with the superior performance of polyamide (nylon) materials, to maintain a strong competitive position in the market, for many partners to create a "stabilizer" for the growth of performance.

Application Chart for MCAM Polyamide (Nylon) Series

Use what you have, use what you can

Efficient and high quality extrusion process

Through a variety of processes, such as drawing, cooling, pelletizing, extraction and drying, MCAM can provide you with high-quality extruded nylon materials with advantages of high toughness, low creep and abrasion resistance.

At the same time, based on the mature and efficient extrusion process, we can further increase the output and reduce the scrap rate, so as to maintain a high cost-effective advantage.

MCAM Extruded Nylon part of the main products list

Ertalon® 6 SA

PA6; natural color (white)/black

This product combines high mechanical strength, stiffness, toughness, mechanical damping and wear resistance with good electrical insulation and chemical resistance, making it a versatile material for mechanical structures and their maintenance.

Ertalon® 66 SA

PA66; natural (cream)/black

With higher mechanical strength, stiffness, heat and abrasion resistance and creep resistance than Ertalon® 6 SA, this product is suitable for machining operations on automatic lathes.

Ertalon® 66-GF30

PA 66-GF30; Black

This 30% glass fiber reinforced nylon grade, Ertalon® 66-GF30, offers higher strength, stiffness, creep resistance and dimensional stability than pure PA 66, as well as outstanding abrasion resistance for higher temperatures.

Ertalon® 4.6

PA 4.6; reddish brown

Higher stiffness, creep resistance and heat aging resistance at all temperatures compared to conventional nylons. Suitable for use in the "higher temperature zone" (80 - 150°C).

Nylatron® GS

PA 66 + MoS2; gray-black color

This product has added molybdenum disulfide to improve rigidity, hardness and dimensional stability, with strong load and abrasion resistance.

Nylatron® 66 SA FR

PA 66 flame retardant; black

This product has added disulfide This product is flame retardant, according to UL 94 standard, 1mm and above thickness can reach V-0 flame retardant grade.

Lightweight and tough, replacing steel with plastic

Excellent casting process

After the casting process, MCAM nylon products can ensure a high relative molecular mass, and have excellent mechanical properties such as high strength, rigidity, impact strength and hardness, as well as high crystallinity, dimensional stability and heat resistance.

With the strong strength of "replacing steel with plastic", it also meets the current development needs of lightweight in many fields.

MCAM cast nylon part of the main products list

Ertalon® 6 PLA

PA 6; natural (ivory)/black/blue

As an unmodified cast PA 6 grade material, it has a strong combination of properties, not only high strength, stiffness and hardness, but also creep resistance, wear resistance, heat aging resistance and good machinability.

Ertalon® LFX

PA 6+ oil; green

A self-lubricating oiled nylon type 6 developed for high load, low operating speed, non-lubricated applications. With a lower coefficient of friction (up to 50% lower) than standard cast nylons, greatly improved pressure-velocity (PV) resistance, and enhanced abrasion resistance (up to 10 times higher), it has a wide range of applications.

Nylatron® MC 901

PA; blue color

This product offers increased toughness, flexibility and fatigue resistance and is well suited for the manufacture of gears, racks and drive pinions.

Nylatron® GSM

PA 6+ MoS2; gray-black color

This product contains fine molybdenum disulfide particles with high wear, impact and fatigue resistance and is widely used in gears, bearings, sprockets and pulleys.

Nylatron® NSM

PA 6+ solid lubricant; light gray

This product contains solid lubricant additives that provide self-lubrication, as well as excellent friction properties, wear resistance, and pressure-velocity (PV) resistance (up to 5 times higher than standard cast nylons). Particularly suitable for high-speed, non-lubricated moving part applications, it complements Ertalon® LFX oil-containing nylon materials.

Nylatron® 703 XL

PA 6 + internal lubricant; purple

Nylatron® 703 XL PA 6+ internal lubricant; purple This is a high performance bearing grade cast nylon 6 type material. With improved wear resistance and outstanding pressure-velocity (PV) resistance, it is a near-zero stick-slip nylon material that avoids stick-slip-induced vibration and noise, making it ideal for use in high-precision motion control.

Nylatron® FST

PA 66 flame retardant, smoke suppressant, low toxicity; natural color

Nylatron® FST PA 66 is an engineering plastic developed specifically for aircraft interior applications. Its unique properties make it an absolutely reliable fire, smoke and low-toxicity (FST) flame retardant material that can withstand extreme temperatures up to 175°C. It is used to make or replace metal and high-performance polymer parts dedicated to aircraft design, such as brackets, sealing sleeves, slides and ducting seals. The material is used to make or replace metal and high-performance polymer parts (e.g., brackets, sealing sleeves, slides and duct seals) that are specifically designed for use in aircraft.