Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Reveal the magic of PEEK material: self-contained flame retardant, less smoke, safety and environmental protection of the new standard
Did you know that PEEK material does not need to add other flame retardant components, comes with flame retardant properties, 1.5mm thickness of the sample can reach UL-94V0 standard, and the amount of smoke is significantly lower than other varieties of resin.
FLAMMABLE RETARDANCE: PEEK (PAEK) tested to V-0, which is a good flame retardant rating. The flammability of a material is its ability to maintain combustion after high-energy ignition of a mixture of oxygen and nitrogen. The recognized standard for measuring flammability is UL94, where a vertical sample of a predetermined shape is first ignited and then the time it takes for the material to self-extinguish is measured.
Smoke: The standard for measuring the smoke produced by burning plastics is ASTM E662. this standard is measured by the Smoke Laboratory of the American National Standards Institute (NBS), which produces samples by burning standard shapes. the degree of visible light dimming of the soot can be made in the case of continuous combustion (with a flame) or with interrupted combustion (without a flame) in which the PEEK has a low smothering performance
Combustion without toxic gases: PEEK and many organic materials are the same, PEEK mainly in the pyrolysis process to produce carbon dioxide and carbon monoxide, the use of the British aircraft test standard BSS 7239 can be detected at very low concentrations of toxic gases escaping, this test process requires the complete combustion of 100 grams of samples in a cubic meter of space, and then analyze the toxic gases produced therein. The Toxicity Index, defined as the ratio of the concentration of toxic gases produced under normal conditions to a potentially lethal dose over a 30 minute period, was 0.22 for the PEEK and no acidic gases were detected.
PEEK material not only has excellent flame retardant properties, but also has efficient smoke release ability and non-toxic combustion characteristics, which is the best choice for you to pursue a safe and environmentally friendly life.
November 05, 2024
November 04, 2024
August 27, 2021
August 26, 2021
PVDF Application Areas Different models of PVDF products are suitable for different application scenarios. According to application fields, PVDF can be divided into conventional grade products and...
Application Performance Advantages of MC nylon MC nylon is a new type of engineering plastics, due to its outstanding comprehensive performance, so that its status in engineering plastics is rapidly...
Types of nylon: 1. Nylon - 6 (PA6) Nylon -6, also known as polyamide -6, that is, polycaprolactam. Translucent or opaque opalescent resin. 2. Nylon - 66 (PA66) Nylon-66, also known as polyamide-66,...
What are the common machining methods used for PTFE parts processing? PTFE parts processing commonly used machining methods are: Molding Molding is suitable for processing simple parts directly once...
Email to this supplier
November 05, 2024
November 04, 2024
August 27, 2021
August 26, 2021
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.