VESCONITE tube ship to customer
Vesconite Tube Sheet ship to customer on 22-11-8 VESCONITE tube ship to customer on 22-11-8
VESCONITE ROD SHEET ship to customer
VESCONITE ROD SHEET ship to customer 2022-11-7 VESCONITE ROD SHEET ship to customer 2022-11-7 VESCONITE ROD SHEET ship to customer 2022-11-7
What is the difference between the machining of plastics and the machining of metal materials
Machining of metal materials. Most of them are cold working. Such as: turning, milling, planing. Pressing. Spraying must be processed by machining after heating the raw materials. Even the recycled waste products must be heated to make recycled raw materials.
What is PEEK plus carbon fiber
Carbon fiber PEEK--polyetheretherketone has excellent heat resistance. Different from Polyether Ether Ketone Peek Sheet , The heat distortion temperature of unreinforced polyetheretherketone is 135-160℃; 20% glass fiber reinforced is 286℃; 30% carbon fiber reinforced is 300℃. The thermal weight loss curve of polyetheretherketone measured by differential thermal method shows that the weight loss is 0% at 400°C; 2.5% at 500°C; and the weight loss increases to
Color Match Delrin Bar Color POM Rod Plate Red Blue Green Yellow 10 20 30 40 50 mm
POM bar is Polyoxymethylene, commonly known as the race steel bar. POM plastic particles are extruded through an extruder at high temperature, and then extruded through the corresponding die mouth to obtain rods of different thicknesses. It is a thermoplastic engineering plastic with high melting point and high crystallinity. Due to the good characteristics of the POM rod, it is very suitable for machining on automatic lathes, especially for the manufacture of precision parts
2" x 24 " x 24 " Rexolite sheet shipment
One piece 2" x 24 " x 24 " Rexolite sheet ship to Germany Customer One piece 2" x 24 " x 24 " Rexolite sheet ship to Germany Customer
Vesconite shipping information
Shipping Vesconite material to China customer to make parts
Rexolite 2.75" diameter Rod x 4Ft
Rexolite 2.75" diameter Rod x 4Ft Ship to France customer on 2022-6-25
HONY@GPO-3 machined parts to USA customer
HONY@GPO-3 machined parts to USA customer on 2020/6/20
What are the physical properties of polyoxymethylene POM
Polyoxymethylene, a thermoplastic crystalline polymer Known as "Super Steel" or "Saigang" Polyoxymethylene The structure is, the English abbreviation is POM Usually a polymer obtained from formaldehyde polymerization The degree of polymerization is not high, and it is easy to be depolymerized by heat Melting point 175°C Tensile strength (yield) 70MPa Elongation (yield) 15% (break) 15% Impact strength (without gap) 108KJ/m2 (with gap) 7.6KJ/m2 Please send inquiry and drawing to sales@hon
Classification of all models of POM plastic: (1) American DuPont: 23P, 51P, 100, 100P, 4510, 500, 500AF, 500AL, 500BK, 500CL, 500NC, 500P, 500T, 507, 507BK, 525GR, 527UV, 570, 577, 588P, 900, 900P, 90EMP, 988P, 927UV, DE-20076-NC, DE-20171, DE-20199, DE-20242, DE-20266-BK602, DE-8902, DE-8903, DE-9422, DE-14009-HP, DE- 9206BK, DE-20323, DE9422-BK602 (2) Polyplastics Japan: M90-44, M90-45, M90-04, M90-02, M90-35, M90, M90S, M25S, M25-04, M25-44, M270, M270-44, M270-UP , M90-71, CS-20, GB-25, GC-25, GH-25, GH-25D, GR-20, VC-32, KT-20, SU-25, SW-01, SW-22, SW -41, SX-35, CW-01, SF-2
An imported material: Is TURCITE what we often say about steel?
Turcite is a thermoplastic self-lubricating bearing material produced by Variseal bearings group in the United States. It is not a steel material, but a pom material. This series of materials has low cost, chemical resistance, wear resistance, and can be used in a wide temperature range. Inside application. Turcite® A, and Turcite® X are modified materials based on polyoxymethylene. Their performance and application can be comparable to Delrin AF. Turcite® only provides bars. Turcite® A is blue; Turcite® X is red in color. Please send inquiry and drawi
What is the difference between pom plastic and pe plastic
Definition of POM (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure in the molecular chain, it can be divided into two types: homopolyoxymethylene and copolyoxymethylene. The important difference between the two is: homopolyoxymethylene has high density, crystallinity, and melting point, but poor thermal stability, narrow processing temperature range (about 10℃), and slightly lower stability to acid and alkali; while copolyoxymethylene has high density, crystallinity, and The
What is the shrinkage rate of plastic POM+30GF?
The shrinkage rate of POM is about 2%, and the shrinkage rate is 1.6-2.0%. POM (polyoxymethylene resin) definition: POM is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure in its molecular chain, it can be divided into two types: homopolyoxymethylene and copolyoxymethylene. The important difference between the two is: homopolyoxymethylene has high density, crystallinity, and melting point, but poor thermal stability, narrow processing temperature range (about 10℃), and slightly lower stability to acid and
POM has been widely used in electronic and electrical, machinery, instrumentation, daily-use light industry, automobiles, building materials, agriculture and other fields. POM has also shown a good growth trend in other new fields. It is widely used in the manufacture of various sliding and rotating mechanical parts, made into various gears, levers, pulleys, and sprockets. It is especially suitable for bearings, hot water valves, and precision metering. Valves, conveyor chains and rollers, flow meters, automobile internal and external handles, cranks and other window rotating machinery,
What is the hardness of the black POM bar?
POM (Polyoxymethylene): English name Polyoxymethylene, commonly known as Saigang. POM plastic particles are extruded through an extruder at high temperature, and then extruded through corresponding die ports to obtain POM sheets and POM rods of different thicknesses and diameters. POM is a thermoplastic engineering plastic with high melting point and high crystallinity. Due to the good characteristics of POM, it is very suitable for machining on automatic lathes, and is especially suitable for manufacturing precision parts. POM is a linear polymer with no side chains, high density and high cry
Is POM material suitable for bolts?
no problem. ROM POM rod, we use the upper tapping thread M14 fine thread with a diameter of 35, L=10, used to install the forward and reverse buttons of the bright knife electric tapping machine, there is no problem at all, we have processed nearly 800 similar materials Handle. There is no problem with the plasticity and toughness of the POM rod. In addition, if you need a cantilever type electric tapping machine Please send inquiry and drawing to sales@honyplastic.com
POM-C is the abbreviation for Polyformaldehyde-copolymer. Copolyformaldehyde is a copolymerization of formaldehyde molecules and ethylene molecules, of which ethylene molecules account for only 1-5%. This formaldehyde has better toughness than another formaldehyde---homopolyoxymethylene, has lower polymerization difficulty, lower cost, and is widely used. Most of the formaldehyde plastics on the market are polyoxymethylene copolymers Please send inquiry and drawing to sales@honyplastic.com
What material is the POM plug steel rod
POM chemical name: polyoxymethylene, commonly known as: Saigang, super steel, plastic steel, POM is produced in many places, domestically produced and imported, and domestically produced are generally cheaper Please send inquiry and drawing to sales@honyplastic.com
The purpose of POM plastic is to replace most non-ferrous metals, automobiles, machine tools, instrument internals, bearings, fasteners, gears, springs, pipes, conveyor belt accessories, electric water cookers, pump casings, drains, faucets, etc. Definition of POM (polyoxymethylene resin): Polyoxymethylene is a linear polymer with no side chains, high density and high crystallinity. According to the different chemical structure i
What is the specific difference between plastic PS and POM?
PS, transparent materials, many packaging materials are used, such as lunch box lids, and transparent containers. POM, commonly known as Saigang, has high hardness, high strength, and good self-sliding properties. It is used in gears and other markets Please send inquiry and drawing to sales@honyplastic.com
1. The adhesive strength of Saigang POM conventional glue can't reach. 2. Adhesive glue Saigang POM can be glued with Coule Industry 4211. 3. It is a one-component room temperature curing adhesive, 4. In addition, mechanical fixing methods and glue can also be used as formulas. Please send inquiry and drawing to sales@honyplastic.com
What is the difference between ordinary POM and POM-C
The molecular structure of POM has two types: homopolyoxymethylene (POM-500P) and copolyoxymethylene (POM-FM090) Homopolymer materials have good ductility and fatigue strength, but they are not easy to process. Copolymer materials have good thermal and chemical stability and are easy to process. Both homopolymer and copolymer materials are crystalline materials and are not easy to absorb moisture. Properties: It is a crystalline thermoplastic plastic with an obvious melting point of 165~175°C, and the property is closest to metal. It is generally called plastic steel (Saigang)
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
