Application of PEEK in textile printing and dyeing machinery industry

Application of PEEK in textile printing and dyeing machinery industry

PEEK sliders, rollers and bushings

In the finalization process of textile printing and dyeing enterprises, there will be chains that carry fabrics to run quickly in high temperature environments, and there will be cloth clips, needle plates, needle seats, etc. on the chains that will have a certain load, so the connecting sliders on the chains It needs a certain strength and wear resistance. The traditional metal slider itself increases the load, wears more seriously, and has high noise, so a high-strength, high wear-resistant, self-lubricating slider is urgently needed to replace the metal slider in the market.

HONY plastic's PEEK wear-resistant slider adopts imported PEEK (polyether ether ketone) polymer as raw material and is injection molded. It has the characteristics of high temperature resistance, corrosion resistance, self-lubrication, wear resistance, maintenance-free, and long life. Advantages, it can reduce the wear on the metal slider and the guide rail, and because the PEEK polymer material itself has good self-lubricating properties, the service life of the slider is extended, and at the same time, the maintenance of the equipment is greatly reduced because there is no need to add high-temperature grease The cost of use can also prevent the fabric from being polluted, thereby ensuring the quality of the printed and dyed fabric and improving the grade of the whole machine

PEEK, PAI amplitude modulation nuts are used in stenter setting machine

In the tentering and setting process of textile printing and dyeing enterprises, the position of the guide rail of the heat setting machine needs to be adjusted according to the width of different fabrics. The traditional copper alloy amplitude adjustment nut is prone to contact with metal in the high temperature working environment of about 220 degrees. If the screen is seized and damaged, it is usually necessary to add lubricating oil and spray molybdenum disulfide lubricant, which not only increases the maintenance cost of the setting machine, but also easily pollutes the fabric, so it has become a major problem that plagues textile printing and dyeing enterprises. There is a need for a nut that does not require lubrication to replace copper nuts.

The PEEK and PAI amplitude modulation nuts produced by Hony Plastic use imported PEEK (Polyetheretherketone) and PAI (polyamideimide) high molecular polymers as raw materials. After injection molding and machining, they have high temperature resistance and corrosion resistance. Lubrication, wear resistance, maintenance-free, long life and other characteristics can reduce the wear on the metal screw rod, and because PEEK, PAI polymer material itself has good self-lubricating properties, prolonging the service life of the nut (PEEK amplitude modulation nut The service life of the copper nut is three times that of the copper nut), and it also greatly reduces the maintenance and use cost of the equipment because it does not need to be sprayed with high-temperature grease and molybdenum disulfide, and it can also prevent the fabric from being polluted, thereby ensuring the printing and dyeing of the finalized fabric quality

PEEK outer six-axis sleeve for textile machine heald frame

In the textile printing and dyeing industry, the heald frame is an important part of the loom, which is a frame with a heald rod and a drive frame connected by the upper and lower beams and the left and right side rails. After the piece heddle is arranged on the heald frame, the warp thread that penetrates into the piece heddle is integrated into one body, and with the movement of the heald lifting mechanism of the loom, the heald frame moves up and down according to the program of the shedding device, so that the warp yarn is layered and opened, and the weft yarn is placed in the warp yarn. Shuttle, and interweave into fabrics of different patterns. The PEEK outer hexagonal bushing is used in the heald frame to play a connecting role. In the working environment of high-speed operation, the traditional graphite outer hexagonal bushing is brittle, easy to break, and easy to wear, which increases the replacement cost of the loom's consumables. Therefore, there is an urgent need for a higher impact resistance and more durable Ground bushings are used instead.

The PEEK outer hexagon bushing produced by HONY plastic uses imported PEEK (polyether ether ketone) polymer as raw material, and is formed by injection molding and machining processes. It has light weight, low load, low noise, high wear resistance, and self- Lubrication, wear resistance, long life and other characteristics, and because the PEEK polymer material itself has good impact resistance, the service life of the PEEK outer hexagonal bushing is extended.

PEEK protective cover is used for the working chain of the setting machine

The PEEK protective cover is used on the working chain of the sizing machine, which mainly plays the role of pressing and fixing the cloth. The PEEK protective cover shows its outstanding performance in the environment of continuous high temperature and fast chain operation.


Dimensional stability Fatigue resistance High wear resistance Self-lubricating Low noise

With many features and advantages, it has successfully replaced the protective cover made of stainless steel, overcomes its non-wear resistance, and avoids the disadvantages of polluting the cloth due to the need for continuous refueling. In line with the concept of environmental protection, low noise, long life and low maintenance cost advocated today, it has become the ideal material choice for customers!

PEEK bushing used in textile machinery

In the setting process of textile printing and dyeing enterprises, the wear resistance requirements of the chain links are very high, especially under the conditions of high temperature and high load. Traditionally, copper sleeves are used. The friction effect of copper sleeves against metals in high temperature environments is not ideal. The wear is serious, and some lubricants need to be added continuously, which will inevitably cause a certain degree of pollution risk to our fabrics, so the market urgently needs a new material to replace the copper sleeve.

The PEEK bushing produced by Hony Plastic is made of imported PEEK (polyether ether ketone) polymer as raw material. After injection molding, it has the advantages of high temperature resistance, corrosion resistance, self-lubrication, wear resistance, maintenance-free, and long life. , and because the PEEK polymer material itself has good self-lubricating properties, it greatly reduces the wear of the shaft sleeve and prolongs the service life. Prevent the fabric from being polluted, thereby ensuring the quality of the printed and dyed fabric and improving the grade of the whole machine

PEEK wear-resistant sliders are used in textile machinery

In the finalization process of textile printing and dyeing enterprises, there will be chains that carry fabrics to run quickly in high temperature environments, and there will be cloth clips, needle plates, needle seats, etc. on the chains that will have a certain load, so the connecting sliders on the chains It needs a certain strength and wear resistance. The traditional metal slider itself increases the load, wears more seriously, and has high noise, so a high-strength, high wear-resistant, self-lubricating slider is urgently needed to replace the metal slider in the market.

HONY plastic PEEK wear-resistant slider adopts imported PEEK (polyether ether ketone) polymer as raw material, after injection molding, it has the advantages of high temperature resistance, corrosion resistance, self-lubricating, wear resistance, maintenance-free, long life and other characteristics , can reduce the wear on the metal slider and the guide rail, and because the PEEK polymer material itself has good self-lubricating properties, the service life of the slider is extended, and at the same time, the maintenance of the equipment is greatly reduced because it does not need to add high-temperature grease It can also prevent the fabric from being polluted, thereby ensuring the quality of the printed and dyed fabric and improving the grade of the whole machine.

HONY plastic's PEEK (polyether ether ketone) polymer and its composite high-performance plastic parts have been widely used in various processes such as textile, sewing, non-woven processing, dyeing and finishing, setting, mercerizing, printing and embroidery. Typical product forms include: wear-resistant sliders, bearings, bushings, dust covers, wear-resistant buffer strips, track wear-resistant strips, amplitude modulation nuts, wear-resistant lifting and falling clips, sleeves, yarn guide wear-resistant strips, washers, Nearly 100 kinds of molding molds and products of high-performance PEEK plastic parts such as gears and helical wear-resistant plates are available in stock all year round.