Application cases of PEEK in electronic semiconductor, photovoltaic and FPD industries(1)

Application cases of PEEK in electronic semiconductor, photovoltaic and FPD industries

PI Vacuum Tip

Product name: 2-4 inch PI vacuum non-marking suction tip

Material: JHPI-84

Features and advantages:

1. High temperature resistance: the long-term use temperature exceeds 300 ℃, and the high temperature will not soften.

2. Good wear resistance.

3. Traceless adsorption characteristics.

4. Excellent resistance to creep or plastic deformation.

Glass Substrate Cassette - PEEK Support Wire

Glass substrate cassette (commonly known as liquid crystal frame; LCD Cassette) is mainly used for carrying, conveying and protecting glass substrate equipment in the production of TFT LCD. The PEEK support line is in the glass substrate cassette, which has wear resistance and high surface hardness, which can greatly reduce the amount of particles produced; ultra-high purity and low outgassing can avoid pollution, thereby improving the yield of the process; High temperature, there is no need to cool down between each stage of process production, thereby improving process efficiency; chemical resistance, can withstand most chemical substances, used for key parts of process production equipment can extend the service life of the equipment and reduce the cost of the equipment maintenance needs.

PEEK screw

Used to replace: PP\PA\POM and other common materials

The characteristics and advantages of PEEK screws:

1. The injection molding process can be used for one-time molding, and the processing cost is low.

2. Corrosion resistance, good resistance to various chemicals in a wide range

3. High temperature resistance: the long-term use temperature is 260°C, and the short-term use temperature can reach 300°C.

4. Light weight.

5. Excellent electrical performance.

6. Radiation resistance.

PEEK conductive bearing

Product name: PEEK bearing

Alternative products: Nylon bearings, PP bearings

Applied to semiconductor wet equipment, LCD etching equipment, solar wet equipment, electroplating equipment

advantage:

1. Excellent wear resistance and high surface hardness can greatly reduce dust generation.

2. Ultra-high purity, low precipitates and low outgassing, which can avoid pollution.

3. High heat resistance, the long-term use temperature is 260°C.

4. Chemical corrosion resistance, which can withstand most chemical corrosive substances and reduce equipment maintenance requirements.

5. Good electrical insulation, it can still maintain good electrical insulation after being used in a high temperature environment for a long time.

6. Low noise.

PEEK wear-resistant roller (PEEK tube wheel)

1. Excellent wear resistance and high surface hardness can greatly reduce dust generation.

2. Ultra-high purity, low precipitates and low outgassing, which can avoid pollution.

3. High heat resistance, the long-term use temperature is 260°C.

4. Chemical corrosion resistance, which can withstand most chemical corrosive substances and reduce equipment maintenance requirements.

5. Good electrical insulation, long-term use in high temperature environment, still maintain good electrical insulation.

6. Low noise.

PEEK vacuum seamless suction cup

Alternative Material: Rubber

Scope of use: for seamless absorption of mobile phone screens, LCD screens, etc.

Advantage:

1. Instant heating to 300 degrees Celsius, continuous heating to 250 degrees Celsius

2. Vacuum traceless adsorption

3. High purity, no halogen elements, no pollution to semiconductor materials

4. Chemical corrosion resistance

5. High strength and wear resistance

6. Can be upgraded to anti-static PEEK production