All Products

Rexolite 1422 sheet round bar

Rexolite 1422 has a combination of good physical and excellent electrical properties including low and stable dielectric constant. These properties make this material suitable for use in microwave lenses as well as for precision components.Rexolite...

REXOLITE ROD 1422 CROSS LINKED POLYSTYRENE

Rexolite® is a unique cross-linked polystyrene, microwave plastic manufactured by C-Lec Plastics Inc. This material’s most notable properties are it’s stable electrical properties into the Giga-hertz frequency range. It is also optically clear, with...

Rexolite® 2200 and the basic Rexolite® 1422

Rexolite is a unique crosslinked polystyrene microwave plastic.The most striking property of this material is its stable electrical properties into the only cross-linked polystyrene, microwave plastic, in the frequency range of gigahertz..It is also...

REXOLITE®1422 Polystyrene Sheet rod

Rexolite is a thermoset , rigid and translucent plastic produced by cross linking polystyrene with divinylbenzene.The material is known for its unusually stable electrical properties into the Giga-hertz range. A cross-linked polystyrene copolymer...

Durostone Anti-Static CDM sheet

Glass Fiber Composite Sheet Antistatic durostone sheet is a composite material made of glass fiber, high-temperature-resistant resin and nano-reinforced materials. It is made into electronic components through CNC precision processing. Automatic...

Durostone®CFR767 – PCB Solder Pallet Materials

The combination of processing cycles in high temperature environments combined with aggressive fluxes can cause degradation of standard Durostone grades.The solution is Durostone CFR767, which is specially formulated for aggressive fluxes and high...

Polyethylene terephthalate (PET-P) Ertalyte® Machining

The registered grades of PET materials are Ertalyte Pure Grade, Ertalyte_TX Gray. PET is characterized by high hardness, rigidity, excellent load resistance, high abrasion resistance and a very good price/performance ratio. Typical applications in...

Rulon® AR PTFE - HONY Plastics

Rulon AR is a derivative of the original Rulon A material and continues the tradition of chemical resistance and long wear, plus reliability for continuous, non-lubricated service. Maroon in color, Rulon AR is ideal for seals and the bonded coatings...

RULON® PLANE BEARINGS material

Rulon® Fluoropolymer Bearings & Machined parts RULON® composites are ideal for non-lubricated, high-load bearing applications in a variety of climates and operating environments, exhibit a high load capacity similar to bronze, powdered metal and...

Rulon LR Chemical Resistant TriStar Plastics

Rulon® LR is a maroon bearing material known for its versatile design properties. Rulon LR is compatible with most hardened steel substrates. Mild steel is acceptable. The harder the running surface, the better. Rulon® is almost universally...

Rulon®LR Chemical Resistant TriStar Plastics

Among the most popular variations of Rulon, Rulon LR is the “Go-To” material for general purpose bearing applications. Rulon LR has a superior chemical inertness, with a ceramic filler for better dielectric and thermal insulation. Our clients depend...

Techtron® HPV PPS machining part

TECHTRON® HPV PPS exhibits excellent abrasion resistance, load capacity and dimensional stability when exposed to chemicals and high temperatures. This material is suitable where PA, POM, PET, PEI and PSU do not work and where PI, PEEK and PAI...

Techtron®PPS Unfilled Virgin machining part

What is PPS material? PPS can also be called polyphenylene sulfide, is a kind of thermoplastic resin with phenyl sulfur group in the main chain of molecule.PPS combines the performance and cost-effectiveness in a way that is unmatched by other...

Tecadur PET machined part

Tecadur PET polyethylene terephthalate is a semi-crystalline engineering thermoplastic with very high strength and good rigidity , excellent machinability and versatility of application.Ensinger offers unfilled and unmodified PET polyester as a...

DuPont™ Vespel ® Polyimide SP-3 15% MoS2 Filled

DuPont™ Vespel® SP-3 is a molybdenum disulfide filled grade of DuPont™ Vespel® that provides outstanding friction and wear performance in vacuum and other moisture-free environments where graphite additives can become abrasive.DuPont™ Vespel® SP-3...

Duratron® D7000 PI Polyimide Plastic Sheet Rod

Duratron® D7000 PI hot compression molded shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these...

Duratron® D7015G 15% Graphite-filled PI

Duratron® D7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression molded Duratron® D7015G PI maintain its performance...

Duratron® D7040G - 40% Graphite-filled PI

Duratron® D7040G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression molded Duratron® D7040G PI maintain its performance...

Duratron® DF7000 PI Polyimide Sheet Rod

Duratron® DF7000 direct-formed parts and near net polyimide shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In...

PLAVIS ® PI (Polyimide) Grades

Plavis®Polyimide Shapes provide superior high temperature resistance, excellent wear and friction properties, good electrical and physical properties and chemical inertness.Plavis exhibits outstanding resistance to creep as well as lubricated or...

TECASINT®2021 black POLYIMIDE WITH 15 % GRAPHITE

TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behaviour. Thanks to its self lubricating...

TECASINT® 2011 natural UNFILLED POLYIMIDE

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining...

DuPont™ Vespel® SP-21 low-friction properties

DuPont™ Vespel® SP-21 is graphite-enhanced with low-friction properties for use with or without lubrication in various applications. Vespel® SP-21 has maximum physical strength, elongation, and toughness. Available as custom parts or stock shapes....

POM Delrin Acetal CNC Machining Services

Polyoxymethylene (POM), also known as polyacetal, polyoxymethylene, and polyoxymethylene, is one of the plastic materials that has many advantages when it comes to CNC machining parts. This plastic is popular across several industries due to its...