Test Methods for Plastics
The following table lists the test methods used to obtain values for typical material properties given in this manual. Because the same property is often referred to by different names, the most commonly used property names are listed here for your reference. For more information on test methods, contact the American Society for Testing and Materials (ASTM), the International Organization for Standardization (ISO), Underwriters Laboratories (UL), or the International Electrotechnical Commission (IEC).
| Characteristic | Alias | Test Method |
| Heat Distortion Temperature | Deflection Temperature under Load, Deflection Temperature under Load, Thermal Distortion Temperature | ASTM D 648, SO 75/Af. 1.8 MPa Load |
| Relative Thermal Index | Continuous Use Temperature | UL 746B, ASTM D 3045 |
| Glass Transition Temperature | Tg | ISO 11357-2, ASTM D 3418 |
| Melting point | Tm | ISO 11357-3, ASTM D 3418 |
| Tensile strength | Rupture strength | ASTM D 638, ISO 527-1 |
| Elongation | Elongation at break | ASTM D 638, ISO 527-1 |
| Flexural modulus | | ASTM D 790, ISO 178 |
| Izod impact strength | | ASTM D 256, ISO 180, Type A |
| Dielectric Strength | Electrical Strength | ASTM D 149, IEC 60243-1 |
| Volume resistivity | | ASTM D 257, IEC 60093 |
| Surface resistivity | | ASTM D 257, IEC 60093 |
| Specific Gravity | Relative Density | ASTM D 792, ISO 1183A |
| Water Absorption | ASTM D 570, ISO 62.24 hours, 23°C | |
| Molding Shrinkage | Molded part shrinkage, shrinkage | ASTM D 955, ISO 294-4 |
| Melt Flow Rate | Melt mass flow rate, melt index | ASTM D 1238, ISO 1133 |
November 05, 2024
November 04, 2024
August 27, 2021
August 26, 2021
PVDF Application Areas Different models of PVDF products are suitable for different application scenarios. According to application fields, PVDF can be divided into conventional grade products and...
Application Performance Advantages of MC nylon MC nylon is a new type of engineering plastics, due to its outstanding comprehensive performance, so that its status in engineering plastics is rapidly...
Types of nylon: 1. Nylon - 6 (PA6) Nylon -6, also known as polyamide -6, that is, polycaprolactam. Translucent or opaque opalescent resin. 2. Nylon - 66 (PA66) Nylon-66, also known as polyamide-66,...
What are the common machining methods used for PTFE parts processing? PTFE parts processing commonly used machining methods are: Molding Molding is suitable for processing simple parts directly once...
Email to this supplier
November 05, 2024
November 04, 2024
August 27, 2021
August 26, 2021
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
