What are the common production processes for acrylic display racks?

The market is full of acrylic display racks, there is a need to show the place has its figure, but we know how much of its production process, acrylic display racks are mainly made of acrylic plate processing, the common process has the following six kinds:

1, Saw processing: saw to process cutting materials, can be cut straight, can also be cut curved. Selection of special saw blades, the cutting effect will be even better.

2, Thermal cutting processing: cutting route curved complex acrylic, it can be cut with a thermal cutting saw, but with a thermal cutting saw to cut the edge of the acrylic thick and uneven, so the thermal cutting molding can only be rough embryo processing, and in the finished product outside of the standard line of thermal cutting, leaving room for finishing, otherwise there will be a finishing out of the smaller than the size of the design drawings.

3, Hot bending: we found a lot of acrylic display is bent, which is the use of hot bending process. Hot bending processing must use the hot bender to do, hot bending the first part of the plate to be folded in the hot bender on the baking soft, and then placed on the edge of the table bending, to be cooled by the temperature of the acrylic, the angle will be fixed into a curved shape.

4, Scratches folding processing: processing acrylic display shelf first need to saw, the plate saw cut, straight cut is also the most common method of cutting material. And scratch and fold processing is a straight line cut-off method, will be placed on the ruler to be processed and cut on the plate, the edge of the ruler and the cutting line coincides with the fixed ruler, so that is a straight line. Hook knife along the edge of the ruler drag row, in the plate cut out a fine groove, when the depth of the fine groove is about half the thickness of the acrylic plate, put the plexiglass plate to the edge of the table, so that the fine groove and the edge of the table to coincide with a hand to hold down the table within the plate, the other hand to hold down the table outside the plate to press down hard, the plexiglass from the position of the hook scratching will be folded off neatly.

5, Chipping: chipping is the use of lathe processing, when the acrylic display shelf processing size requirements are very accurate, you need to use a lathe chipping, so as to ensure that the size is accurate. Chipping is worth noting to ensure that the tool is clean and clean without residual debris, so as not to scratch the acrylic.

6, File processing: file is filed with a file, frustration is finishing. Like sawing the edge of the acrylic rough sharp, we need to file, you can remove the batch of front to make it smooth and smooth, feel not scratch. In addition, like the size is a little big, also want to use the frustration to slightly correct, to achieve the size requirements.