| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Duratron® T4203 PAI
Brand: Duratron
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
The file is encrypted. Please fill in the following information to continue accessing it
Duratron® T4203 PAI Polyamide-imide AE (Aerospace) offers the most superior impact strength of all Duratron® T PAI grades, while also possessing the highest elongation of all Duratron® grades. Due to its intrinsic high temperature resistance, dimensional stability, and exceptional machinability, Duratron® T4203 PAI AE is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, and an excellent choice for aerospace wear applications involving impact loading and abrasive wear.
Material Properties
Superior impact strength
Highest elongation of all Duratron® grades
Dimensional stability
Exceptional machinability
High temperature resistance
Available Geometries
Duratron® T4203 PAI AE stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate
Available Colors
Duratron® T4203 PAI AE stock shapes come in the following colors: Yellow-Green
Key Properties
Thermal Performance to 500°F (260°C) Continuous Use Temp
Creep Resistant
Excellent Wear Properties
High Outstanding Electrical Properties
Highest Impact Strength of all PAI Grades
Low Outgassing Material
Total Mass Loss (TML%) 1.85%
Collected Volatile Condensable Materials (CVCM%) 0.00%
Water Vapor Regained (WVR%) 0.49%
Limitations
Duratron® T PAI Grade Materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Bushings & Bearings
Cams
Connectors
High Temp High Strength Electrical Housings
Oil & Gas Down Hole Components
Semiconductor Test Sockets
Thrust Washers
Wear Rings
Typical Properties of Duratron ® T 4203 PAI Extruded
DETAIL Description Value Material Type Imidized Amorphous Thermoplastic Chemical Name PAI Polyamide-imide Trade Name Duratron® T4203 PAI Additives Unfilled Electrical Grade Color Dark Yellow Manufacturer Mitsubishi Chemical Advanced Materials
PHYSICAL Property Test Unit of Measure Value Density ASTM D792 g/cm³ 1.41 ASTM D792 lb/in³ 0.051 Water Absorption, 24 hrs, Immersion ASTM D570 % by wt. 0.4 Water Absorption, Saturation, Immersion ASTM D570 % by wt. 1.7 MECHANICAL Property Test Unit of Measure Value Tensile Strength ASTM D638 psi 20000 Tensile Modulus ASTM D638 psi 600000 Tensile Elongation at Break ASTM D638 % 10 Flexural Strength ASTM D790 psi 24000 Flexural Modulus ASTM D790 psi 600000 Compressive Strength ASTM D695 psi 24000 Compressive Modulus ASTM D695 psi 478000 Hardness ASTM D785 NA Rockwell E80 (M120) IZOD Impact-Notched ASTM D256 ft-lb/in 2 Dynamic Coefficient of Friction QTM 55007 (Dry vs Steel) NA 0.35 THERMAL Property Test Unit of Measure Value Coefficient of Linear Thermal Expansion ASTM D696 x 10-5 in./in./℉ 1.7 Heat Deflection Temp ASTM D648 ℃ at 264 psi 278 ASTM D648 ℉ at 264 psi 532 Max Continuous Operating Temp ℃ at 264 psi 260 ℉ 500 Minimum Operating Temp ℃ at 264 psi -200 ℉ -328 Thermal Conductivity ASTM C117 BTU-in/ft²-hr-℉ 1.8 Flammability Rating UL94 NA V-0 ELECTRICAL Property Test Unit of Measure Value Dielectric Strength ASTM D149 V/mil 580 Dielectric Constant at 1 MHz ASTM D150 NA 4.2 Dissipation Factor at 1 MHz ASTM D150 NA 0.026 Surface Resistivity ASTM D257 ohm/square >10^13
COMPLIANCE Description Value FDA No USDA No NSF No 3-A Dairy No Canadian Food Inspection Agency No USP Class VI No OTHER Description Value UV Resistant No
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now