| Payment Type: | T/T,Paypal |
| Incoterm: | DDU,FOB,CIF,EXW,CFR,DDP |
| Min. Order: | 1 Kilogram |
| Transportation: | Air,Express,Land,Ocean |
| Port: | Shenzhen ,Guangzhou,Hongkong |
Model No.: VESCONITE
Brand: Vesconite
Place Of Origin: South Africa
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
The file is encrypted. Please fill in the following information to continue accessing it
Vesconite Tube Rod Vesconite Sheet Rod Bushing replacement for traditional bushing and bearing materials. Offering a unique combination of high load-bearing strength, low friction and low wear, Vesconite does not require manual lubrication, even in harsh and dirty working environments.
Vesconite Tube Rod is tried and tested in literally thousands of applications across a wide range of industries – from general industrial, to marine, agriculture and many more industries. Vesconite has an impressive dimensional stability, and, unlike many synthetic alternatives, Vesconite retains its strength under wet conditions. It displays negligible creep under high load.
Vesconite Rod Sheet is available in a wide range of rods, bushings, plates, and machined custom parts.
Vesconite has built-in lubricants that translate into low friction and long life, even where no lubrication is applied.
Vesconite provides outstanding wear resistance, resulting in extended service life compared to bronze bushings. Unlike many traditional materials, Vesconite is less affected by poor lubrication and dirty conditions.
Vesconite has very low creep rates and can therefore operate under tight tolerances. It has a much higher load capacity than nylon, and its compressive strength and clearances are not affected by water absorption.
Vesconite does not swell when exposed to water or humid conditions, while nylon can swell up to 3% when immersed. In most applications, little allowance needs to be made for moisture changes.
Vesconite has outstanding dynamic friction, with a friction coefficient (0.13 – 0.18) of less than half that of bronze or nylon. This allows for a higher PV ratio (load x speed).
Vesconite is suitable for continuous use at 100º – 120°C (212º – 248°F) in dry conditions and 60° – 70°C (140° – 158°F) in wet conditions.
With Vesconite, the wear rate of corresponding metal pins and shafts can be reduced by as much as 90%. The resultant cost-saving benefits can alone justify a switch to Vesconite in many applications.
Vesconite is resistant to dilute and moderate acids, organic solvents, oils and petroleum. It has limited resistance to strong acids and alkalis.
Vesconite machines easily on standard wood- and metal-working equipment, such as lathes, milling machines, bandsaws, drilling machines, planers, spindle molders and routers. As many of our customers around the world will testify, Vesconite is a both a pleasure to machine and fit.
Combining an exceptionally low wear rate and shaft-friendly features, Vesconite and its corresponding parts require little maintenance – resulting in significant cost savings.
| TECHNICAL SPECIFICATIONS FOR VESCONITE | METRIC | IMPERIAL |
| Dynamic unlubricated friction on steel | 0.12-0.20 | 0.12-0.20 |
| Compressive yield strength | 89 Mpa | 12750 psi |
| Design load(static,oscillating or occasional movements) | 30 Mpa | 4250 psi |
| Linear expansion at 65℃ relative humidity | 0.04% | 0.04% |
| Linear expansion - saturated | 0.07% | 0.07% |
| Maximum operating temperature guide | | |
| Dry | 100℃-120℃ | 210℃-250℃ |
| Wet | 60℃-70℃ | 140℃-160℃ |
| Thermal coefficient of expansion | 6x10-5 mm/℃ | 3.3x10-5 mm/℃ |
| Density / specific gravity | 1.38 g/ml | 1.38 g/ml |
| Modulus of elasticity | 2.2 GPa | 500000 psi |
| Poisson's ratio (oriented) | 0.37-0.44 | 0.37-0.44 |
Vesconite Bushing Size
| 20 x 10 x 1,000 | 25 x 15 x 1,000 | 30 x 15 x 1,000 | 30 x 20 x 1,000 |
| 35 x 20 x 1,000 | 35 x 25 x 1,000 | 35 x 30 x 1,000 | 40 x 20 x 1,000 |
| 40 x 25 x 1,000 | 40 x 30 x 1,000 | 45 x 25 x 1,000 | 45 x 35 x 1,000 |
| 45 x 30 x 1,000 | 50 x 20 x 1,000 | 50 x 25 x 1,000 | 50 x 30 x 1,000 |
| 50 x 35 x 1,000 | 50 x 40 x 1,000 | 55 x 35 x 1,000 | 55 x 40 x 1,000 |
| 55 x 45 x 1,000 | 60 x 25 x 1,000 | 60 x 35 x 1,000 | 60 x 40 x 1,000 |
| 60 x 45 x 1,000 | 60 x 50 x 1,000 | 65 x 25 x 1,000 | 65 x 35 x 1,000 |
| 65 x 40 x 1,000 | 65 x 45 x 1,000 | 65 x 50 x 1,000 | 70 x 35 x 1,000 |
| 70 x 50 x 1,000 | 75 x 50 x 1,000 | 75 x 60 x 1,000 | 80 x 25 x 1,000 |
| 80 x 35 x 1,000 | 80 x 40 x 1,000 | 80 x 50 x 1,000 | 80 x 55 x 1,000 |
| 80 x 60 x 1,000 | 80 x 65 x 1,000 | 85 x 60 x 1,000 | 90 x 35 x 1,000 |
| 90 x 40 x 1,000 | 90 x 50 x 1,000 | 90 x 55 x 1,000 | 90 x 65 x 1,000 |
| 90 x 70 x 1,000 | 90 x 80 x 1,000 | 100 x 35 x 1,000 | 100 x 45 x 1,000 |
| 100 x 60 x 1,000 | 100 x 75 x 1,000 | 110 x 50 x 1,000 | 110 x 70 x 1,000 |
| 110 x 90 x 1,000 | 120 x 60 x 1,000 | 120 x 70 x 1,000 | 120 x 75 x 1,000 |
| 120 x 90 x 1,000 | 120 x 100 x 1,000 | 130 x 20 x 1,000 | 130 x 75 x 1,000 |
| 130 x 85 x 1,000 | 130 x 100 x 1,000 | 140 x 60 x 1,000 | 140 x 75 x 1,000 |
| 140 x 100 x 1,000 | 140 x 125 x 1,000 | 155 x 75 x 1,000 | 155 x 100 x 1,000 |
| 155 x 125 x 1,000 | 160 x 140 x 1,000 | 170 x 85 x 1,000 | 170 x 125 x 1,000 |
| 180 x 100 x 1,000 | 180 x 115 x 1,000 | 180 x 140 x 1,000 | 205 x 115 x 1,000 |
| 205 x 150 x 1,000 | 205 x 170 x 1,000 | 225 x 125 x 1,000 | 225 x 150 x 1,000 |
| 225 x 170 x 1,000 | 225 x 190 x 1,000 | 250 x 170 x 1,000 | 250 x 190 x 1,000 |
| 250 x 215 x 1,000 | 260 x 170 x 1,000 | 260 x 190 x 1,000 | 260 x 215 x 1,000 |
| 275 x 170 x 1,000 | 275 x 190 x 1,000 | 275 x 215 x 1,000 | 275 x 225 x 1,000 |
| 300 x 190 x 1,000 | 300 x 215 x 1,000 | 300 x 225 x 1,000 | 300 x 250 x 1,000 |
| 325 x 215 x 1,000 | 325 x 250 x 1,000 | 325 x 275 x 1,000 | 350 x 250 x 1,000 |
| 350 x 275 x 1,000 | 350 x 300 x 1,000 | 365 x 215 x 1,000 | 375 x 225 x 1,000 |
| 375 x 250 x 1,000 | 375 x 275 x 1,000 | 375 x 300 x 1,000 | 400 x 250 x 1,000 |
| 400 x 300 x 1,000 | 400 x 325 x 1,000 | 400 x 350 x 1,000 | 420 x 300 x 1,000 |
| 420 x 325 x 1,000 | 420 x 350 x 1,000 | 450 x 300 x 1,000 | 460 x 350 x 1,000 |
| 460 x 375 x 1,000 | 460 x 400 x 1,000 | 480 x 375 x 1,000 | 480 x 400 x 1,000 |
| 510 x 400 x 1,000 | 510 x 425 x 1,000 | 510 x 450 x 1,000 | 525 x 425 x 1,000 |
| 550 x 400 x 1,000 | 550 x 425 x 1,000 | 550 x 450 x 1,000 | 550 x 475 x 1,000 |
| 575 x 450 x 1,000 | 575 x 475 x 1,000 | 600 x 475 x 1,000 | 600 x 500 x 1,000 |
| 600 x 525 x 1,000 | 625 x 500 x 1,000 | 625 x 525 x 1,000 | 625 x 560 x 1,000 |
| 650 x 580 x 1,000 | 650 x 600 x 1,000 | 670 x 560 x 1,000 | 670 x 600 x 1,000 |
| 670 x 630 x 1,000 | 715 x 600 x 1,000 | 715 x 630 x 1,000 |
Vesconite Rod Size
| 8 x 1,000 | 10 x 1,000 | 12 x 1,000 | 16 x 1,000 |
| 18 x 1,000 | 20 x 1,000 | 25 x 1,000 | 27 x 1,000 |
| 30 x 1,000 | 35 x 1,000 | 40 x 1,000 | 45 x 1,000 |
| 50 x 1,000 | 55 x 1,000 | 60 x 1,000 | 65 x 1,000 |
| 70 x 1,000 | 75 x 1,000 | 80 x 1,000 | 90 x 1,000 |
| 100 x 1,000 | 110 x 1,000 | 115 x 1,000 | 125 x 1,000 |
| 135 x 1,000 | 150 x 1,000 | 160 x 1,000 |
Vesconite Plate Size
| 2 x 200 x 1,000 | 3 x 200 x 1,000 | 5 x 200 x 1,000 | 6 x 200 x 1,000 |
| 8 x 200 x 1,000 | 10 x 200 x 1,000 | 12 x 200 x 1,000 | 15 x 200 x 1,000 |
| 16 x 200 x 1,000 | 20 x 200 x 1,000 | 25 x 200 x 1,000 | 30 x 200 x 1,000 |
| 35 x 200 x 1,000 | 40 x 200 x 1,000 | 50 x 200 x 1,000 | 75 x 200 x 1,000 |
| 3 x 400 x 500 | 5 x 400 x 500 | 8 x 400 x 500 | 10 x 600 x 1,000 |
| 16 x 600 x 1,000 | 20 x 600 x 1,000 | 25 x 600 x 1,000 | 40 x 600 x 1,000 |
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now