All Products

Semitron® MPR 1000 PAI

Semitron® MPR 1000 shapes possess excellent heat resistance and low rates of outgassing and erosion in plasma chambers. This high purity material with low ionic content is often chosen for vacuum chamber applications within etch, CVD, and ion...

Semitron® ESD 520HR Polyamide-Imide

SEMITRON® ESD PAI 520HR (tawny gray): Best-in-class combination of properties: electrostatic discharge, high strength and high temperature resistance. This new electrostatic discharge material becomes the ideal material for slots, sockets and...

Duratron® T7530 30% carbon fiberreinforced polyamideimide

Duratron® T7530 is a compression molded, 30% carbon fiber-reinforced polyamide-imide with 1-5% PTFE that exhibits outstanding strength and stiffness in non-abrasive wear applications. Duratron® T7530 has the lowest coefficient of linear thermal...

Duratron®T4301 Bearing Grade PAI

Duratron® T4301 PAI AE (aerospace) offers a very low expansion rate and coefficient of friction, and also exhibits little to no slip-stick in use. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron®...

Duratron® T7130 PAI Polyamide-imide 30% carbon fiber

Duratron® T7130 PAI Polyamide-imide is a 30% carbon fiber-reinforced grade that offers exceptional stiffness, nonabrasive wear performance, and the lowest coefficient of thermal expansion of all PAI materials. These characteristics give Duratron®...

Ertalon® 6 SA PA6 Chemical resistant nylon 6

Ertalon® 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent...

Ertalon® 6 SA PA6 nylon 6 black

Ertalon® 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent...

Ertalon® 6 SA PA6 nylon 6

Ertalon® 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent...

TECAMID 6 FRT PA6 NATURAL MODIFIED FLAME RESISTANCE

TECAMID 6 FRT is PA 6 that has been modified for inherent flame resistance. This nylon combines good wear and sliding properties with high strength and good chemical resistance.TECAMID 6 FRT is suitable for aerospace and railway industries and...

Flame retardant PA6 - TECAMID® 6 FRT black

TECAMID 6 FRT black is a flame retardant plastic, and is therefore included in the group of non flammable plastics. This flame resistant PA6 plastic is equivalent to all other nylon PA 6 materials when it comes to mechanical, chemical, thermal and...

Glastic® UTR GFK-UP sheet

Rochling Glastic composites pultruded channels and angles are similar in material construction to the Grade UTR flame and track resistant laminates. A small amount of continuous glass roving is added to aid in pultrusion processing. These...

Acrylic Plastic Parts from Transparent Clear

Acrylic acid and its esters polymerization of polymers obtained collectively referred to as acrylic esters, the corresponding plastics collectively referred to as polyacrylic acid plastics, of which methyl methacrylate is the most widely used....

Proteus® O & P Natural Homopolymer PP

Proteus® O & P Natural Homopolymer PP shapes maintain the durability required by the orthotics and prosthetics industry, while also exhibiting top thermoforming performance capabilities. In addition to these key characteristics, Proteus® O &...

Robalon® S PE PE-UHMW - PE 1000

ROBALON-S by Röchling Leripa Papertech is a crosslinked, ultra-high molecular weight polyethylene (UHMWPE) grade, alloyed with molybdenum disulphide. It is free from splits or breaks. Exhibits outstanding sliding characteristics, very low friction,...

Fiberglass Products GPO3 UPGM 203 SMC Laminate Sheet

UPGM203, also known as GPO-3 , commonly used colors are white, red, brown-red. Refers to the unsaturated polyester glass fiber mat board material, mechanical and electrical use, good electrical properties under high humidity, good mechanical...

PTFE Seals PTFE Lip Seals PTFE Oil Seals

Polytetrafluoroethylene seal (PTFE) (also known as PTFE seal ring or PTFE oil seal) is a high-performance sealing material with many unique advantages, such as excellent chemical resistance, excellent high temperature resistance, and low friction...

Polypropylene Sheets Cut to Size and Shape

PTFE rod 4-120 mm diameter selectable

PTFE rods are rods molded by molding, paste extrusion or plunger extrusion for processing various gaskets, seals and lubricating materials that work in corrosive media, as well as electrically insulating parts that are used at various frequencies,...

Ultra-high polymer polyethylene guide rail

Ultra-high polymer polyethylene guide @ beverage factory production machinery polyethylene chain guide Ultra-high molecular weight polyethylene guide rail this excellent performance of thermoplastic engineering plastics, in the early stage of...

Ensinger Tecamid® 6/6 Nylon (PA66)

TECAMID® 66 HI natural features a PA 66 with a special additive that reduces the thermal degradation of the molecular chains. As a result, service temperatures of around 59°F higher can be achieved compared to the capabilities of standard PA66...

TECAMID 66 natural PA 66 UNFILLED

Polyamide 66 has good rigidity, hardness, abrasion resistance and thermal dimensional stability. In addition, nylon 66 has outstanding wear resistance and low frictional properties. It also has very good temperature, chemical, and impact properties....

Customize Cnc Machined Milling Acrylic PMMA Parts

Crafts or consumer products made of acrylic material according to its good characteristics Acrylic products are crafts or consumer products made from acrylic material according to its good characteristics. Because acrylic products have high...

TIVAR® - Ultra High Molecular Weight PE Products

UPE polymer polyethylene processed parts combines the superior performance of all plastics, is a thermoplastic engineering plastics, has with wear resistance, high temperature, low temperature, impact resistance, chemical corrosion resistance,...

POM CNC Machined Part Customized Plastic Acetal Delrin

Polyoxymethylene (POM), also known as polyacetal, polyacetaldehyde, and polyformaldehyde, is one of the plastic materials that offers many advantages when it comes to CNC machined parts. This plastic is popular in several industries due to its...