| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: TECAPEEK RP natural
Brand: TECAPEEK
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
The file is encrypted. Please fill in the following information to continue accessing it
TECAPEEK RP natural is comparable to the fossil based version and is characterised by outstanding mechanical properties, especially at high temperatures. The reprocessed PEEK material is also known for its chemical resistance and application temperatures of up to 260 °C. Thanks to its excellent dimensional stability and high creep resistance, it is particularly suitable for demanding machined parts.
Ensinger engages in PEEK reprocessing of TECAPEEK RP natural in the form of PEEK tubes, PEEK plates and PEEK rods made from reprocessed plastic material.
TECAPEEK RP natural is part of Ensinger's "Reuse for Tomorrow" solutions, which includes carefully developed products that contribute significantly to environmental protection through their reduced CO2 footprint.
FACTS
Chemical designation
PEEK (Polyetheretherketone)
Colour
beige
Density
1.31 g/cm3
MAIN FEATURES
from reprocessed by-products/ production residues with optimized PCF
inherent flame retardant
good heat deflection temperature
good machinability
resistance against high energy radiation
very good chemical resistance
high creep resistance
hydrolysis and superheated steam resistant
TARGET INDUSTRIES
chemical technology
mechanical engineering
electronics
energy industry
food technology
oil and gas industry
aircraft and aerospace technology
automotive industry
semiconductor technology
vacuum technology
Techanical Data Sheet
| Mechanical properties | ||||
| MECHANICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Modulus of elasticity | 4200 | MPa | 1mm/min | DIN EN ISO 527-2 |
| (tensile test) | ||||
| Tensile strength | 109 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 109 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield (tensile test) | 5 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break (tensile test) | 15 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 175 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity | 4200 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| (flexural test) | ||||
| Compression modulus | 3400 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Compression strength | 23/43/102 | MPa | 1% / 2% / 5% | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 4 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Shore hardness | 89 | D | DIN EN ISO 868 | |
| Thermal properties | ||||
| THERMAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Glass transition temperature | 150 | C | DIN EN ISO 11357 | |
| Melting temperature | 341 | C | DIN EN ISO 11357 | |
| Heat distortion temperature | 162 | C | HDT, Method A | ISO-R 75 Method A |
| Thermal conductivity | 0.27 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.1 | J/(g*K) | ISO 22007-4:2008 | |
| Service temperature | 300 | C | short term | NN |
| Service temperature | 260 | C | long term | - |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-60°C, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-100°C, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 7 | 10-5*1/K | 100-150°C, long. | DIN EN ISO 11359-1;2 |
| Electrical properties | ||||
| ELECTRICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| surface resistivity | 1015 | Ω | Silver electrode, 23°C, 12% r.h. | - |
| volume resistivity | 1015 | Ω*cm | Silver electrode, 23°C, 12% r.h. | DIN IEC 60093 |
| Dielectric strength | 73 | kV/mm | 23°C, 50% r.h. | ISO 60243-1 |
| Resistance to tracking (CTI) | 125 | V | Platin electrode, 23°C, 50% r.h., solvent A | DIN EN 60112 |
| Other properties | ||||
| OTHER PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Resistance to hot water/ bases | + | - | ||
| Flammability (UL94) | V0 | listed (value at 1.5mm) | DIN IEC 60695-11-10; | |
| Resistance to weathering | - | - | ||
| Water absorption | 0.02 - 0.03 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
| Water absorption | % | saturation (23°C) | DIN EN ISO 62 | |
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now