| Payment Type: | T/T,Paypal |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Sustaglide® green PA
Brand: SUSTAGLIDE
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
About SUSTAGLIDE®
SUSTAGLIDE® in an internally lubricated type 6 cast nylon. It exhibits a low coeffient of friction, good wear and abrasion resistance, and is a great choice for sliding applications under heavy loads.
Sustaglide® is a highly modified caprolactum grade, incorporating a lubricating "particulate matrix" that is evenly distributed throughout the polymer that further reduces the sliding coefficient of friction.
Sustaglide® is Green in colour.
This grade has 5 times higher Pressure-Velocity capability over standard Sustamid® Pa6 G type.
According to EC and FDA regulations, Sustaglide® is suitable for use in contact with food.
Properties
Specialised sliding additives enable higher loads and sliding face temperatures
Optimum performance - Low coefficient of friction
Optimum performance - Wear capacity Excellent abrasion resistance
Very good mechanical strength
Very good chemical, thermal and low friction properties
Excellent bearing material
Excellent short-term and long-term heat resistance
High stiffness at elevated temperatures
High creep resistance, especially at elevated temperatures
Outstanding toughness
Excellent fatigue behaviour
Good resistance to chemicals
A high PV rating
Very good co-efficient of friction
Excellent electrical insulation properties
Applications
Insulation bushing
Sliding Parts Under High Load: Wear Pressure Plates
Slide Bearings
Journal Bearings
Gears & Sprockets
High speed chain guides that exceed 100 feet per minute
Crane pulleys ( sheaves )
Bearing both in linear and circular
High impact pile driving
Bearing pads
High load packing blocks up to 13 ton per square inch of load bearing
Meat works
Beverage
Truck pads and shackle bushes
Technical Specifications Sustaglide® green
| General properties | |||
| Test Method | Unit | Guideline Value | |
| Density | DIN EN ISO 1183-1 | g / cm3 | 1,14 |
| Water absorption | DIN EN ISO 62 | % | 2,0 |
| Flammability (Thickness 3 mm / 6 mm) | UL 94 | HB / HB | |
| Mechanical properties | |||
| Test Method | Unit | Guideline Value | |
| Yield stress | DIN EN ISO 527 | MPa | 75 |
| Elongation at break | DIN EN ISO 527 | % | 35 |
| Tensile modulus of elasticity | DIN EN ISO 527 | MPa | 3400 |
| Notched impact strength | DIN EN ISO 179 | kJ / m2 | 3,5 |
| Shore hardness | DIN EN ISO 868 | scale D | 81 |
| Thermal properties | |||
| Test Method | Unit | Guideline Value | |
| Melting temperature | ISO 11357-3 | °C | 215 |
| Thermal conductivity | DIN 52612-1 | W / (m * K) | 0,25 |
| Thermal capacity | DIN 52612 | kJ / (kg * K) | 1,70 |
| Coefficient of linear thermal expansion | DIN 53752 | 10-6 / K | 80 |
| Service temperature, long term | Average | °C | -40...110 |
| Service temperature, short term (max.) | Average | °C | 160 |
| Heat deflection temperature | DIN EN ISO 75, Verf. A, HDT | °C | 90 |
Tel: 86-852-34604012
Whatsapp: +8618680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now