Semitron® ESD 520HR PAI - MCAM
Get Latest PricePayment Type: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 1 Kilogram |
Transportation: | Ocean,Land,Air,Express |
Port: | Shenzhen,Guangzhou,Hongkong |
Payment Type: | T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 1 Kilogram |
Transportation: | Ocean,Land,Air,Express |
Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Semitron® ESD 520HR PAI
Brand: Semitron
Selling Units | : | Kilogram |
Package Type | : | Export package |
The file is encrypted. Please fill in the following information to continue accessing it
Semitron® ESD 520HR is an electrostatic dissipative PAI material that possesses the unique ability to resist dielectric breakdown at high voltages. As a result, Semitron® ESD 520HR is the only Semitron® grade that maintains its performance throughout the 100V to 1000V voltage range while also offering the mechanical performance needed to excel in demanding applications. This characteristic, combined with its high strength and heat resistance, make Semitron® ESD 520HR an ideal solution for test equipment and device handling applications within the semiconductor and electronics industry.
Material Properties
Resistant to dielectric breakdown from 100V to 1000V
Electrostatic dissipative
High mechanical strength
High heat resistance
Available Geometries
Semitron® ESD 520HR PAI stock shapes encompass a range of standard sizes in the following geometries: Plate
Available Colors
Semitron® ESD 520HR PAI stock shapes come in the following colors: Black
Key Properties
Surface resistivity 10^10 to 10^12 Ohm/Square (Antistatic Range)
Thermal performance to 500°F (260°C) Continuous Use
High Strength & Heat Resistance
Low CLTE
Semitron® ESd products are inherently dissipative. They do not rely on atmospheric phenomena (humidity) to activate, nor are surface treatments used to achieve dissipation. Static electricity is dissipated through these products as readily as it is dissipated along the surface.
Limitations
Semitron® ESd 520HR PAI materials have a relatively high moisture absorption rate, parts used in high temperature service or made to tight tolerances should be kept dry prior to installation.
Thermal shock resulting in deformation can occur if moisture laden parts are rapidly exposed to temperatures above 400°F (205° C).
Chemical Resistance to Strong Bases, Steam and Some High Temperature Acids
Applications
Back End Test Contactors
Back End Test Equipment Nests
Back End Test Equipment Sockets
Device Handling Components
Electronic Assembly Components
Typical Properties of Semitron ® ESd 520 HR PAI
Material Type | Imidized Amorphous Thermoplastic | ||
Chemical Name | PAI Polyamide-imide | ||
Trade Name | Semitron®ESd 520HR | ||
Additives | Proprietary ESD Additives | ||
Color | Black/Green | ||
Manufacturer | Quadrant | ||
PHYSICAL | |||
Property | Test | Unit of Measure | Value |
Density | ASTM D792 | g/cm³ | 1.58 |
ASTM D792 | lb/in³ | 0.057 | |
Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.6 |
Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 4.6 |
MECHANICAL | |||
Property | Test | Unit of Measure | Value |
Tensile Strength | ASTM D638 | psi | 12,000 |
Tensile Modulus | ASTM D638 | psi | 800,000 |
Tensile Elongation at Break | ASTM D638 | % | 3 |
Flexural Strength | ASTM D790 | psi | 20,000 |
Flexural Modulus | ASTM D790 | psi | 850,000 |
Compressive Strength | ASTM D695 | psi | 30,000 |
Compressive Modulus | ASTM D695 | psi | 600,000 |
Hardness | ASTM D785 | NA | Rockwell M108 |
IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.8 |
Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.24 |
Wear K Factor | QTM 55010 | in鲁-min/ft-lbs-hr | 300 |
Limiting PV | QTM 55007 | psi-fpm | 27,000 |
THERMAL | |||
Property | Test | Unit of Measure | Value |
Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 2.8 |
Heat Deflection Temp | ASTM D648 | °C at 264 psi | 271 |
ASTM D648 | °F at 264 psi | 520 | |
Max Continuous Operating Temp | °C | 260 | |
°F | 500 | ||
Minimum Operating Temp | °C | -200 | |
°F | -328 | ||
Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 2.48 |
Flammability Rating | UL94 | NA | V-0 |
ELECTRICAL | |||
Property | Test | Unit of Measure | Value |
Dielectric Strength | ASTM D149 | V/mil | 475 |
Dielectric Constant at 1 MHz | ASTM D150 | NA | 5.76 |
Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.182 |
Surface Resistivity | ANSI/ESD STM 11.11 | ohm/square | 10^10 - 10^12 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.