High temperature resistant antistatic PEEK rod-Hony Plastic

HONYESD®Antistatic PEEK Rod performance, high temperature resistant anti-static PEEK rod anti-static PEEK rod performance, high temperature resistant anti-static PEEK rod. PEEK is polyether ether ketone rod, which is extruded from Victrex PEEK raw material. PEEK rod not only has better heat resistance than other high temperature resistant plastics, but also has high strength, high modulus, high fracture toughness and excellent dimensional stability. PEEK rod has good toughness, and its excellent fatigue resistance to alternating stress is the most outstanding among all plastics, comparable to alloy materials.

HONYESD®Antistatic PEEK rod is a high temperature resistant, high performance thermoplastic special engineering plastic. It has good mechanical properties, chemical resistance, wear resistance, hydrolysis resistance and other properties; it has light specific gravity and good self-lubricating performance. Due to its very good processing performance, it can be filled with carbon fiber, molybdenum disulfide, etc. to further improve the lubrication performance and Mechanical strength. The wide application space of PEEK engineering plastics involves aviation, machinery, electronics, chemical industry, automobile and other high-tech industrial fields. It can manufacture high-demand mechanical parts, such as gears, bearings, piston rings, support rings, sealing rings (letter), Valve plate, wear ring, etc. .

HONYESD®Antistatic PEEK rod is a high temperature resistant, high performance thermoplastic special engineering plastic. It has good mechanical properties, chemical resistance, wear resistance, hydrolysis resistance and other properties; it has light specific gravity and good self-lubricating performance. Due to its very good processing performance, it can be filled with carbon fiber, molybdenum disulfide, etc. to further improve the lubrication performance and Mechanical strength. The wide application space of PEEK engineering plastics involves aviation, machinery, electronics, chemical industry, automobile and other high-tech industrial fields. It can manufacture high-demand mechanical parts, such as gears, bearings, piston rings, support rings, sealing rings (letter), Valve plate, wear ring, etc.

The excellent performance of PEEK rod material is mainly manifested in the following aspects:
1. High temperature resistant-peek rod
PEEK has a high glass transition temperature and melting point (334°C), which is one of the reasons why it can be used reliably in applications requiring heat resistance. Its thermal deformation temperature under load is as high as 316°C, and its continuous use temperature is 260°C.

2. Mechanical properties - peek rod
PEEK is a plastic that has both toughness and rigidity in balance. In particular, its excellent fatigue resistance to alternating stress is the most outstanding among all plastics, comparable to alloy materials.

3. Self-lubrication - peek rod
PEEK has outstanding sliding properties among all plastics and is suitable for applications that strictly require a low coefficient of friction and wear resistance. In particular, the self-lubricating performance of PEEK modified by mixing carbon fiber and graphite in a certain proportion is better.

4. Chemical resistance (corrosion resistance) - peek rod
PEEK has excellent chemical resistance. Among common chemicals, only concentrated sulfuric acid can dissolve or destroy it. Its corrosion resistance is similar to that of nickel steel.

5. Flame retardant - peek rod
PEEK is a very stable polymer, and the 1.45mm thick sample can reach the highest flame retardant standard without adding any flame retardant.

6. Peel resistance - peek stick
PEEK has good peeling resistance, so it can be made into thin-coated wires or magnet wires, and can be used under harsh conditions.

7. Fatigue resistance - peek rod
PEEK has the best fatigue resistance among all resins.

8. Radiation resistance - peek rod
The ability to resist gamma radiation is very strong, surpassing Polystyrene, which has the best radiation resistance among general-purpose resins. It can be made into a high-performance wire that can still maintain good insulation ability when the gamma irradiation dose reaches 1100 Mrad.

9 Hydrolysis resistance - peek stick
PEEK and its composite materials are not chemically affected by water and high-pressure water vapor, and products made of this material can still maintain excellent characteristics in continuous use in high-temperature and high-pressure water.

No. Item Unit Value
1 specific gravity g/cm3 1.32-1.4
2 Moisture absorption % 0.2
3 Thermal conductivity (23) % 0.25
4 Tg 143
5 Tm 334
6 Working temperature -180～+260
7 Tensile strength MPa 94
8 Bending strength MPa 145
9 Flexural modulus GPa 3.8
10 Dielectric constant - 3.2
11 Dielectric loss - 0.0033
12 volume resistance Ω.cm 1016
13 Flame retardant UL-94 V-0

Model and color of peek stick:
 
1. PEEK-1000 (brown gray) is made of pure Polyetheretherketone resin, which has the best toughness and impact resistance among all PEEK grades. PEEK-1000 can be sterilized by the most convenient sterilization methods (steam, dry heat, ethanol and gamma rays), and the raw material composition of PEEK-1000 complies with EU and US FDA regulations on food compatibility, these characteristics make it suitable for use in It is very commonly used in the medical, pharmaceutical and food processing industries. 

2. PEEK-HPV (black) is the result of adding PTFE, graphite and carbon fiber, making PEEK-HPV a bearing-grade plastic. Its superior tribological properties (low coefficient of friction, wear resistance, high peak pressure limit) make this class an ideal material for tribological applications. 

3. PEEK-GF30 (brown gray) This material is filled with 30% glass fiber reinforced plastic, which has better rigidity and creep resistance than PEEK-1000, as well as better dimensional stability, and it is more convenient to manufacture structural parts. ideal. It can withstand fixed load for a long time at high temperature. If PEEK-GF30 is used as the sliding part, its suitability should be carefully checked, because the glass fiber scratches the mating surface. 

4. PEEK-CA30 (black) The material is filled with 30% carbon fiber reinforcement, which has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance than PEEK-GF30, and is reinforced with carbon fiber Plastic is 3.5 times more thermally conductive than unreinforced PEEK plastic - dissipating heat from bearing surfaces faster.
 
The size of the peek stick: 2-200MM*1000MM