| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: Acetron® AF Blend / Ertacetal® H-TF POM-H
Brand: Ertacetal
| Selling Units | : | Kilogram |
| Package Type | : | Export package |
The file is encrypted. Please fill in the following information to continue accessing it
Acetron® AF Blend / Ertacetal® H-TF POM-H Homopolymer Polyoxymethylene
Acetron® AF Blend / Ertacetal® H-TF POM-H is a unique thermoplastic material for use in moving parts in which low friction and long wear resistance are important. The material has a high strength, toughness, dimensional stability and good machinability as well as improved wear characteristics over unfilled POM-H. Unblended Acetron® AF Blend / Ertacetal® H-TF POM-H offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content. This added PTFE typically decreases the wear capability and impact strength. Acetron® AF 100 is available on a custom basis.
Material Properties
Low friction, long wearing
High strength, toughness
High dimensional stability, machinability
Available Geometries
Acetron® AF Blend / Ertacetal® H-TF POM-H stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate
Available Colors
Acetron® AF Blend / Ertacetal® H-TF POM-H stock shapes come in the following colors: Brown
Key Properties
Lower Coefficient of Friction (COF)
Enhanced Wear Resistance over other Acetal Grades
Good Wear Performance in Wet Environments
Low Moisture Absorption
Limitations
Wear Resistance in Dry Environments
Poor Resistance to Strong Acids and Alkalies
Larger Cross Sections are prone to Centerline Porosity
Applications
Bushings & Bearings
Conveying / Material Handling Components
Electrical Components
Packaging Machinery Components
Metal Replacement Applications
Rollers
Typical Properties of Acetron ® 100 AF Blend POM-H Homopolymer Acetal
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | POM Polyoxymethylene Acetal Homopolymer | ||
| Trade Name | Acetron®AF POM-H | ||
| Additives | PTFE | ||
| Color | Brown | ||
| Manufacturer | Mitsubishi Chemical Advanced Materials | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.5 |
| ASTM D792 | lb/in³ | 0.054 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.2 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 8,000 |
| Tensile Modulus | ASTM D638 | psi | 435,000 |
| Tensile Elongation at Break | ASTM D638 | % | 15 |
| Flexural Strength | ASTM D790 | psi | 12,000 |
| Flexural Modulus | ASTM D790 | psi | 445,000 |
| Compressive Strength | ASTM D695 | psi | 16,000 |
| Compressive Modulus | ASTM D695 | psi | 350,000 |
| Hardness | ASTM D785 | NA | Rockwell M85 (R115) |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.7 |
| Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.19 |
| Wear K Factor | QTM 55010 | in鲁-min/ft-lbs-hr | 60 |
| Limiting PV | QTM 55007 | psi-fpm | 8,300 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 5 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 118 |
| ASTM D648 | °F at 264 psi | 244 | |
| Melting Point Temp | ASTM D3418 | °C | 175 |
| ASTM D3418 | °F | 347 | |
| Max Continuous Operating Temp | °C | 82 | |
| °F | 180 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Flammability Rating | UL94 | NA | HB |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 400 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.1 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.01 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now