Sheets RCH 1000 Tivar 1000

TIVAR® is the brand name of Quadrant EPP for its extensive range of virgin, partially reprocessed, colored or modified Ultra High Molecular Weight Polyethylene stock shapes. TIVAR® Premium UHMW Polyethylene is an ultra high molecular weight polyethylene known for its wear and corrosion resistance, self-lubrication, low coefficient of friction, and impact strength. It is lightweight and outperforms stainless steel, weighing only 1/8 as much. It also can handle wide temperature ranges, making it perfect for use on freezing lines or on lines with intermittent temperatures of up to 212° F. TIVAR® can address problems such as noise, premature wear, stretched chains, and expensive replacements. It is ideal for a wide range of applications, from food processing, to bulk material handling, to pharmaceutical processing. TIVAR® needs no special care and can be cleaned with water, steam, detergents, or disinfectants.

Grades and Colors

• TIVAR® 1000
  TIVAR® 1000 is an excellent general-purpose material that meets FDA, USDA and 3-A Dairy guidelines for food handling and pharmaceutical processing. Applications include guide rails, rollers, chain tensioners guides, wastewater-treatment scraper blades, wearstrips, and bearings.
  

• TIVAR® Recycled
  TIVAR® Recycled is a blend of virgin and reclaimed TIVAR®. This product is good for less demanding, non-FDA applications, such as forest-product drag conveyor flights, conveyor-chain wear plates, and belt-conveyor wipers and skirts.
  

• TIVAR® H.O.T.
  TIVAR® H.O.T. maintains key performance properties (such as resistance to oxidation, corrosion, and chemicals) over and extended range of temperatures. It performs exceptionally well in manufacturing environments of up to 275º F, nearly 100º higher than other UHMW-PE formulations. It has a reduced oxidation rate, which slows material degradation and extends wear-life in chemical or high-temperature environments. It meets FDA guidelines and is USDA compliant. TIVAR® H.O.T. is an ideal material for use in conveyor systems or other equipment that often is exposed to chemical wash-downs.
  

• TIVAR® AntiStatic
  TIVAR® AntiStatic protects parts sensitive to dust and static electricity accumulation, providing a surface resistivity of between 10^5 and 10^9 (ohms/cm2). Applications include grain handling, electronics, and the chemical, explosives, and munitions industries.
  

• TIVAR® DrySlide
  TIVAR® DrySlide is modified with dry lubricants to enhance its coefficient of friction and antistatic properties. It is recommended for parcel-handling chutes and transfer plates, and also for conveyor components in dusty environments. It has the lowest coefficient of friction of any of the TIVAR® products.
  

• TIVAR® Ceram P
  TIVAR® Ceram P is composed of virgin polymer and premium additives, making it a shatter-resistant alternative to ceramics and is noted for its dimensional stability. It is suited for high-speed, high-load, and sliding-abrasion applications and can outwear AR steel, virgin UHMW, and other materials.
  

• TIVAR® Oil Filled
  TIVAR® Oil Filled uses oil-filled polymers to achieve an enhanced coefficient of friction. It often is used for applications requiring higher-pressure velocity values, such as sprockets and conveyor components. TIVAR® Oil Filled also meets FDA guidelines for food processing and handling applications.
  

• TIVAR® UV Resistant
  TIVAR® UV Resistant has been modified for enhanced stability in outdoor applications. Applications include snowplow blades, dock-fender facings, farm machinery, snowmobile ski skins and belly-pan liners, and amusement park slides and wear components.
  

• TIVAR® CleanStat
  TIVAR® CleanStat is FDA approved and USDA compliant for use in food processing applications where static charge build-up is a problem. It is long-wearing and has a lower coefficient of friction than stainless steel.
  

• TIVAR® 88
  TIVAR® 88 is the product of choice for all bulk-material handling operations. It has excellent abrasion and chemical resistance, making it the longest-wearing liner material produced. Its low surface friction enables even the stickiest of bulk materials to flow freely, eliminating problems such as arching and ratholing. It is well suited for use in chutes, hoppers and process equipment. TIVAR® 88 is lightweight and easily machined. It is also available in an antistatic formulation.
  

• TIVAR® 88-2
  TIVAR® 88-2 is a weldable version of TIVAR® 88, making it an excellent choice for solving complicated chute and hopper lining problems. It is also available in an antistatic formulation and can be used to make one-piece “drop-in” liners for chutes and hoppers.
  

• TIVAR® 88 with BurnGuard
  TIVAR® 88 with BurnGuard is the product of choice for liners that might be exposed to combustion. It is designed to self-extinguish when the combustion source is removed. TIVAR® 88 with BurnGuard meets MSHA 1C-112/1 for underground mining and has a UL94 V-0 flammability rating.