ESD Antistatic PTFE Sheet Rod

1. What is meant by anti-static PTFE?
PTFE is also called Plastic King, F4. The temperature range is very wide (from -180℃ to 250℃). Excellent mechanical properties including anti-aging especially for bending and swinging applications. Very low water absorption and a range of unique properties such as self-lubricating and non-stick. The overall resistance value is 106-109Ω in the hammer test and has stable antistatic properties.

Anti-static PTFE rods/anti-static PTFE plates are made of PTFE resin filled with a certain proportion of carbon nanofibers, a semiconductor profile pressed at high temperatures by a mold, with good static discharge function at room temperature. The material as a whole anti-static will not be processed and anti-static properties of the decline, but when the use of different environments, especially the temperature and humidity changes, its anti-static properties have an impact!

2.What are the properties of antistatic PTFE?

It is rich in anti-static filler, such as carbon powder, its resistivity is relatively stable, the surface resistance value is between 10 of 6Ω/cm-10 of 9Ω/cm, with good static elimination performance, resistivity balanced: due to the uniform distribution of filler, for the whole anti-static material, especially after mechanical processing, its resistivity does not change, even if the surface has been worn, resistivity is unaffected, a good coefficient of flame retardancy ( UL-94V0 grade), low water absorption, impact strength in general, good chemical resistance, good machining performance and resistance to high energy radiation performance, high dimensional stability, creep resistance, good resistance to fire (). UL-94V0 grade), low water absorption, general impact strength, good chemical resistance, good machinability and resistance to high-energy radiation, high dimensional stability, good creep resistance.

Application :

1. Used in the electrical industry, used in the aerospace, aviation, electronics, instrumentation, computer and other industries as the insulation layer of power and signal lines, corrosion-resistant and wear-resistant materials can be used to make films, tube sheets, bearings, washers, valves and Chemical pipelines, pipe fittings, equipment container linings, etc.

2. Used in the fields of electrical appliances, chemical industry, aviation, machinery, etc. instead of quartz glassware, used in ultra-pure chemical analysis and storage of various acids, alkalis, and organic solvents in atomic energy, medicine, semiconductor and other industries. It can be made into high-insulating electrical parts, High-frequency-resistant wire and cable sheathing, corrosion-resistant chemical utensils, high-cold-resistant oil pipelines, artificial organs, etc. can be used as additives for plastics, rubber, coatings, inks, lubricants, greases, etc.

3. This product is resistant to high temperature and corrosion, has excellent electrical insulation, aging resistance, low water absorption, and excellent self-lubricating performance. It is a general-purpose lubricating powder suitable for various media and can be quickly applied to form a dry film , To be used as a substitute for graphite, molybdenum and other inorganic lubricants. Suitable for thermoplastic and thermosetting polymer release agent, excellent load-bearing capacity. It is widely used in elastomer and rubber industry and anti-corrosion. 

4. Used as a filler for epoxy resin to improve the wear resistance, heat resistance and corrosion resistance of epoxy adhesives.

5. Mainly used as a binder and filler for powder cakes.