Pdf is encrypted. Please provide your email address and enter your password to access
We provide PDF for you to look at the catalog, and you need to provide an email address.
Free Catalogs We provide PDF for you to look at the catalog, and you need to provide an email address.
Altron™ PPO Polyphenylene Oxide Technical Data Sheet
Altron™ Polyphenylene Oxide PPO shapes are characterized by their excellent electrical insulating properties, great stability, and mid-range temperature resistance. These properties, in addition to good electrical characteristics, make these stock shapes an excellent choice for electrical/electronic applications.
Altron™ LSG PC Polycarbonate technical data sheet
Altron™ LSG PC (Life Science Grade) stock shapes are made from unfilled PC resin. The material is pre-assessed for biocompatibility at the stock shape level for up to 24 hours contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Altron™ LSG PC offers outstanding impact resistance, toughness, and dielectric properties. While the material is not suitable for steam sterilization and dry heat, it offers good resistance to other common methods of sterilization including EtO (Ethylene Oxide), plasma, gamma- and X-ray irradiation. These characteristics make Altron™ LSG PC components a favored solution for applications in the medical and bioprocessing industries such as medical device housings, analyzers, and bioreactor equipment.
Altron™ PC Polycarbonate Techanical Data Sheet
Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.
Ketron® HPV PEEK Poly-ether-ether-ketone data sheet
Ketron® HPV Polyetheretherketone PEEK shapes are carbon fiber reinforced, with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® HPV PEEK’s combination of low wear and friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals.
Proteus® Homopolymer PP Natural Polypropylene technical data sheet
Proteus® Homopolymer PP Natural shapes are characterized by their high strength-to-weight ratio, excellent chemical and corrosion resistance capabilities, thermoforming performance, and zero moisture absorption. In addition to these key properties, this grade of polypropylene is also FDA and NSF making it ideal for chemical processing, food processing, storage, and medical applications. For their performance and compliance, Proteus® Homopolymer PP Natural components are often favored in orthotic and prosthetic devices, pump components, storage tanks, and valve bodies.
Sanalite® HDPE High Density Polyethylene Techanical Data Sheet
Sanalite® HDPE is an odorless and taste-free pebbled finished cutting board material recognized as the industry standard of excellence for use in food preparation and meat/poultry processing. Lightweight, easily cleaned and sanitized, and compliant with FDA, USDA, NSF, and Canada AG standards, Sanalite® HDPE excels in a variety of wet applications due to its zero moisture absorption qualities.
TIVAR® H.O.T. UHMW-PE Ultra High Molecular Weight Polyethylene
TIVAR® H.O.T. UHMW-PE Ultra High Molecular Weight Polyethylene TIVAR® H.O.T. UHMW-PE (HIGHER OPERATING TEMPERATURE) excels in a variety of industrial manufacturing environments where temperatures reach up to 275°F. TIVAR® H.O.T. UHMW-PE reduces oxidation rate at higher temperatures, slows degradation and extends wear-life in chemical, elevated temperature and thermo-cycling environments. TIVAR® H.O.T. UHMW-PE meets FDA/USDA guidelines and is 3-A Dairy Sanitation compliant, making it the ideal, longer life material for wear parts in dairy, bakery, poultry/meat and other food processing industries where higher temperatures or frequent chemical wash downs shorten part life.
Proteus® LSG HDPE Technical Data Sheet
Proteus® LSG HDPE (Life Science Grade) stock shapes are made from HDPE resin and pre-assessed for biocompatibility on both resin and stock shape for up to 24 hours body contact according to USP VI and ISO 10993, as well as wetted contact in bioprocessing. Proteus® LSG HDPE shapes exhibit low extractables and leaching, low moisture absorption, and great resistance to chemical cleaning agents, allowing parts to retain excellent impact resistance and good tensile strength throughout repeated use. For these reasons, Proteus® LSG HDPE is a great candidate for upstream applications in bioreactors and downstream applications chromatography and filtration.
Proteus® HDPE High Density Polyethylene Technical Data Sheet
Proteus® HDPE shapes are used in a variety of environments requiring excellent impact resistance, superior tensile strength, low moisture absorption, great chemical and corrosion resistance, and easy fabrication and welding capabilities. Due to these characteristics and properties, Proteus® HDPE is often a favored solution for components in chain guides, orthotic and prosthetic devices, tanks, thermoformed material handling devices, and water storage applications.
Semitron® CNT POM-C | MCAM
Competitive advantage Semitron® POM CNT is an extruded static dissipative POM-C based polymer system developed specifically for electronic fixture applications that require a precise surface resistivity range yet offering increased dimensional stability vs conventional POM ESd products
Acetron® AF Blend / Ertacetal® H-TF POM-H Technical Data Sheet
Acetron® AF Blend / Ertacetal® H-TF POM-H is a unique thermoplastic material for use in moving parts in which low friction and long wear resistance are important. The material has a high strength, toughness, dimensional stability and good machinability as well as improved wear characteristics over unfilled POM-H. Unblended Acetron® AF Blend / Ertacetal® H-TF POM-H offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content. This added PTFE typically decreases the wear capability and impact strength. Acetron® AF 100 is available on a custom basis.
Acetron® / Ertacetal® H POM-H
Acetron® Polyoxymethylene POM-H / Ertacetal® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness, and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron® POM-H / Ertacetal® H POM-H excel in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves, and fluid handling components.
Tel: 86-852-34604012
Whatsapp: +86 18680371609
Address: FLAT/RM B 5/F GAYLORD COMMERCIAL BUILDING 114-118 LOCKHART ROAD WANCHAI HONGKONG, HONGKONG China Hong Kong
Website: https://www.honyplastic.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
